Electronics Forum | Tue Jan 03 13:37:19 EST 2012 | comando
Ok, I'm technical at Napco Security System production factory Dom. Rep. there are 13 line with CP43, IP2, IP3, GL5 etc. Camera #2 don't work at one IP3 and We can't pay Fuji specialist but we have to calibrate it, I chane the camera but i don't know
Electronics Forum | Tue Dec 13 18:30:46 EST 2011 | IT23
Currently, we are using fixed barcode scanners that connect to Cogiscan PFC box. The scanners are mounted using a flexible arm. The flexible arm is hard to adjust so that the scanner will be on top of the label every time it hits the sensor. I'm look
Electronics Forum | Wed Dec 21 17:11:58 EST 2011 | davef
Kim: We understand what you're saying. For us, fluxing the BGA and activating the flux are the issues. * If you're squirting liquid flux under the BGA with a plastic bottle with a needle tip on it and then reflowing less than the whole board with a
Electronics Forum | Thu Dec 22 06:46:01 EST 2011 | rameshraja
Dear All, We are doing PCBA's manufacturing,Inprocess we are doing manual soldering, reflow and wave soldering process, As per ISO-7.5.2 Process validation ( Special process ) Soldering process is considered as an special process, hence in order to
Electronics Forum | Tue Jan 03 21:23:06 EST 2012 | atpico
I’ve got a MPI M500 pick and place and I want to get the best out of it. I started to restore it with fair results. What is the story of this company MPI M&M Products Inc? Are still there lost or old stock components and shops which will maintain the
Electronics Forum | Thu Feb 16 02:44:03 EST 2012 | fadzril
Dear all, Have anyone deal with X-Out boards? These defects are declared if one cavity or more from multi cavity boards are defective. There have been a request to use these boards in order to reduce the multi cavity board spoilage at supplier. Ho
Electronics Forum | Fri Feb 24 08:02:22 EST 2012 | cobham1
Our production runs normally are 20 piece builds. We don't what to brush because of the brush marks left behind. Reason we wanted a machine is more control then dipping with a tub and modified paper clips. The other problem we have is the company as
Electronics Forum | Mon Feb 27 09:31:30 EST 2012 | pauld
Hi Dave, Picture a camera mounted on top of a fixed base that pans 360 deg. back and forth. The motor connects through a circular slip ring board with brush connection. The rings are hard gold and the typical brush material is soft. Unlike the armatu
Electronics Forum | Thu Mar 15 06:01:24 EDT 2012 | andyhat
We run Mascots for leaded assembly on 15 stations for 20 product types in around 2500 variations...the system works brillianlty for us, but we experience programs going out of sequence for no apparent reason spontaneously - literally, an operator can
Electronics Forum | Sat Apr 07 23:56:44 EDT 2012 | isd_jwendell
If I was to try and repair the board, I too would opt to use an adhesive and a press. I try not to use super glue for anything though, instead I would probably use a thin (low viscosity) epoxy that doesn't turn brittle after it sets. I would use a pr
