Electronics Forum | Fri Nov 13 08:27:43 EST 2009 | herman
Your customer is very unreasonable to demand void-free BGA SJs. Minor voiding is not a condition for rejection per IPC-A-610D, J-STD-001D, or even J-STD-001DS (Space addendum). Having said that, let me tell you that the voiding has little or nothing
Electronics Forum | Sat Feb 27 20:02:06 EST 2010 | jmelson
Yup, that seems to be the procedure in the manual. But, it gets complicated, as the head has a rotation, the part has a rotation, and the MA station has a rotation, and it gets pretty confusing to figure out which way to tweak the offset values for
Electronics Forum | Thu Feb 18 14:42:38 EST 2010 | djsmith1000
Hi everyone, First post here. I am completely new to smt as well. We are a small startup and would like improve our in-house smt assembly capability from manual assembly. We are looking at small production runs, initially about a total of 200 board
Electronics Forum | Fri Mar 26 11:50:47 EDT 2010 | rway
The programming time depends on the system you are using. I use YesTech. It has been a reliable system for catching the majority of production issues. The programming time on this system is around 20-30 min. with a full library, meaning you don't
Electronics Forum | Fri May 07 00:52:24 EDT 2010 | boardhouse
Hi Derek, just curious of one thing - are the vias within the BGA's the only vias covered or are all vias on the board covered. Just trying to figure out what is making this area different from the rest of the board. Regarding leaching, I do not be
Electronics Forum | Fri Jul 09 19:09:52 EDT 2010 | rway
A couple of things: Does the cap break if you try to remove it with hot air? If not, than you are breaking the caps do to mechanical stress. We have had similar issues. I don't think your board is suffering from mechanical stress from depaneling o
Electronics Forum | Tue Jun 29 22:56:04 EDT 2010 | deanm
There may be a better way, but this is how we do it: We have one SMT line and ALL SMT parts are kept in the SMT area. There is no kitting of SMT parts...only through hole, etc. For each SMT part in our ERP system, we set for backflush. That means th
Electronics Forum | Thu Jul 01 12:15:24 EDT 2010 | rgduval
How do you track your current reel issue/utilization from stock to the floor? I assume you issue the parts to a work order of some description (probably tied to a sales order, and a customer purchase order, for accounting purposes). So...from your
Electronics Forum | Sat Sep 11 08:19:54 EDT 2010 | slwolbert
Greetings: I am having 'Check Servo' issues with an FCP 2 4000. It will zero set but given a few minutes afterwards, the check servo alarm sounds. At times the X/Y table will 'coast' back to beginning position, like the power has been cut to the
Electronics Forum | Tue Sep 21 18:46:24 EDT 2010 | slwolbert
Greetings: > > I am having 'Check Servo' issues > with an FCP 2 4000. It will zero set but given a > few minutes afterwards, the check servo alarm > sounds. > > At times the X/Y table will 'coast' > back to beginning position, like the power