Electronics Forum: production and line and plan (Page 1 of 14)

Planned and Unplanned production stops

Electronics Forum | Thu May 07 15:24:57 EDT 2015 | twf

Hello Fellow SMTnet Members, taking a quick survey: Your SMT production line comes to a halt. What's your top 3 planned and unplanned causes for this?

Planned and Unplanned production stops

Electronics Forum | Thu May 07 18:30:24 EDT 2015 | comatose

Planned: End of day, Out of parts, Someone forgot to queue up another magazine Unplanned: Part mis-pick, Stencil printer 2d inspection failure, Conveyor or mag handler jammed

Compressor for Pick and Place line

Electronics Forum | Thu May 21 12:53:38 EDT 2020 | spoiltforchoice

A cheap piston compressor (like you might use in a garage) should be rated such that it has ~50% duty cycle, you don't want it running continuously. They are very affordable but do switch on and off between two essentially hardwired setpoints. The b

Compressor for Pick and Place line

Electronics Forum | Mon May 25 20:51:13 EDT 2020 | kylehunter

> A cheap piston compressor (like you might use in > a garage) should be rated such that it has ~50% > duty cycle, you don't want it running > continuously. They are very affordable but do > switch on and off between two essentiall

Need low cost pick and place machine for limited production

Electronics Forum | Tue Aug 11 17:36:44 EDT 2009 | dyoungquist

You are looking for a complete SMT assembly line plus possible X-Ray inspection and rework equipment. The 3 components of the SMT line are stencil printer, pick-n-place machine and reflow oven. How small are your components? 0603? 0402? What is the

Automatic Optical Inspection in production -Which test and where

Electronics Forum | Sat Feb 01 04:49:59 EST 2003 | testing

Hi, We currently have several AOIs on our production/test line which I feel as an engineer, are not being used to their true potential. Does anyone have any ideas on how I can improve their use i.e SPC, Placement in the production line etc since we

SMT line expansion - new oven and selective solder

Electronics Forum | Sat Feb 22 11:37:00 EST 2020 | kylehunter

Hey all, I've made a post in the past about us expanding to a new space, but I wanted to do a new post with specific questions. We currently have a DEK 265, Phillips Opal Xii, and a Heller 1500. Our main reason for expanding is to have a lead-free

Leaded and Lead-Free products in single SMT line

Electronics Forum | Thu Sep 01 02:51:31 EDT 2011 | zedor

HI, We currently have two SMT lines, one running leaded products and the other lead-free. There is a recommendation to combine the two to increase the line capacity. What do you think are the pros and cons, is there a risk in contamination ot the

Leaded and Lead-Free products in single SMT line

Electronics Forum | Thu Sep 01 06:41:43 EDT 2011 | kahrpr

We run lead free and leaded on all of our lines. When lead free first came out we went to the extremes to make sure not one atom of lead would get into the process. I remember we were told that the world would end if leaded products were within a hal

Leaded and Lead-Free products in single SMT line

Electronics Forum | Thu Sep 01 11:45:48 EDT 2011 | emeto

You can bet it was a conspiracy. Customers don't usually chew the PC boards inside their TVs,coffee machines or other electronic equipment. And if Lead is so dangerous why do we still run it and we still have to talk about problems about Lead. An

  1 2 3 4 5 6 7 8 9 10 Next

production and line and plan searches for Companies, Equipment, Machines, Suppliers & Information

pcb assembly supplies

Inspection mirrors for electronic rework and repair.
MSD Dry Cabinets

Best Reflow Oven
High Throughput Reflow Oven

Repair tools for all your electronic circuit board repair needs.
RETROFIT for More Effective Dispensing

Easily dispense fine pitch components with ±25µm positioning accuracy.


무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐