Electronics Forum: profil (Page 1 of 452)

Validating Oven Thermal Profiles

Electronics Forum | Thu Aug 14 18:04:36 EDT 2008 | smt_guy

I have made couple of investigations with our oven. I set-up 5 product profiles and run a thermal profile measurement and record them. Then I set-up one more product profile and rename that as Validation Profile then measured the thermal profile. A

Profiling on rail vs mesh conveyors

Electronics Forum | Mon Dec 14 09:22:04 EST 2009 | jammm

I need to profile a single sided board thats width is less than the profiler. Is there a difference in profiles when one is completed using the rail conveyor versus just laying the board and profiler on the mesh conveyor?

Oven Profile

Electronics Forum | Wed Mar 10 19:50:42 EST 2004 | Ken

check out KIC Thermal Profiling....good, simple tool to use for profiling.

reflow profile

Electronics Forum | Tue Feb 19 09:24:25 EST 2019 | cyber_wolf

Reflow profiles are based on the product and materials you are soldering. You need profiling software and a data logger.

Profiling board

Electronics Forum | Thu Mar 28 03:19:54 EST 2002 | Opor

Hi All Does anybody have done the profiling board life time experiment? What is the proper life time of FR4 profiling board? How can we know when the profile board or thermocouple should be change?How to use dummy board instead of using gold/real

Re: Convection Oven and thermo profiling of Circuit Boards

Electronics Forum | Wed Apr 19 11:54:32 EDT 2000 | Rudolf Niebling

You need a KIC profiler whitch is able to find optimal profiles for your boards. The KIC works very well with the Heller ovens. With the KIC is also possible to find one good profile for different boards. Get in contact with KIC +1-858-673-6050

THERMAL PROFILING

Electronics Forum | Thu Apr 12 15:16:35 EDT 2001 | Rex Breunsbach

Profiles design is primarily determined by oven geometry, paste specifications and component thermal limitations. This means that no one "standard" profile exists for all production. A free profile planning utility can be quickly downloaded from

reflow profile

Electronics Forum | Thu Aug 24 08:59:38 EDT 2000 | Eugene Smelik

Dr. Lee, For Pb-free solders, will the reflow profile be similar to that of Sn/Pb, with an flux activation plateau before going to peak reflow, or will the profile be more linear in nature? Are there advantages/disadvantages to either profile for P

Re: 0402's Tombstoning

Electronics Forum | Thu Oct 14 13:26:31 EDT 1999 | Brian W.

I would suggest comparing the profile your factory used and the one they are using. Run a profile on some of the 0402 parts. If the profile is not right, uneven heating will cause this to occur. It could also be the placement accuracy in combinati

Machine profiling and product profiling

Electronics Forum | Thu Jan 23 16:59:14 EST 2003 | barry

what are the methods used out there to verify reflow oven performance or machine profiling. What intervals are good practice and is it necessary. We do product pofiles with our profiling equipment and can that be used to base your machine performance

  1 2 3 4 5 6 7 8 9 10 Next

profil searches for Companies, Equipment, Machines, Suppliers & Information