Electronics Forum | Fri Apr 07 17:44:07 EDT 2006 | ratsalad
I still have half of a 500 g jar of this paste left. I'm going to give it another shot, but my first experience was not so wonderful. Everything was great until we reflowed it. Our profile matched AIM's recommendation, as far as I can see. The ch
Electronics Forum | Fri Jun 09 11:55:34 EDT 2006 | jbrower
Howdy Amol, As far as I can see, there aren't too many pitfalls with SN100C. Just make sure to keep all of your alloys seperated. The issues that I am working out right now is the profiles with our wave pallets and some of our larger components. We
Electronics Forum | Wed Oct 04 09:55:51 EDT 2006 | borgie
Hi. I have product in lead containing process that consist lead free BGAs and also big ceramic BGAs with high temperature bumbs. Pcb tends to bow in a reflow profile, since I need long preheating times and relatively high peak temperature to melt BG
Electronics Forum | Tue Nov 14 21:27:26 EST 2006 | davef
"Hidden pillow" seems to be a a variant of "pillow effect" or "head in pillow". Pillow effect is an open, with non-wetting between the lead and the solder on the pad. Here the lead sags into the solder without any bonding or wetting. Poor wetting c
Electronics Forum | Fri Jun 15 12:37:53 EDT 2007 | ed_faranda
I do want to run a profile, but they won't give up the machine long enough for me to run one. The boards that we are running through the wave are large boards, with large caps, and large transformers on it. We're building highend power amps that
Electronics Forum | Thu May 01 10:31:26 EDT 2008 | cdsullivan
Good Morning, We are seeing an increased number of our customers that specify a Pb-Free BGA when the rest of the board assembly is SnPb. Of course when we reflow at the SnPb profiles, we don't always get a properly collapsed BGA. So we end up rewor
Electronics Forum | Thu Jul 03 19:27:54 EDT 2008 | proy
5 Zone HVA70 Oven Board 6 layer, 10" x 13" lots of space, most critical is 100 pin QFP AIM Water Soluble 487 Tin Lead paste on SN100C HASL boards This board is giving me disproportionate grief! I am running 23 in / min which gives me about 3.1 mi
Electronics Forum | Wed Jan 07 00:18:14 EST 2009 | milanrit
Recently on one of my assemblies(sn/pb) I started seeing leaded BGA failure at functinal test for opens, but when I inspected them through 5DX and ERSA Scope it doesnt seem like there is any opens or insufficient and half no. of boards passed functio
Electronics Forum | Thu Nov 05 09:50:14 EST 2009 | adlsmt
Before you buy a manual screen printer try to do it by hand. We hand stenciled boards with 19mil pitch parts for three years with decent results, with your parts it should be simple. lay the board on a piece of ESD bubblewrap, the kind with small bub
Electronics Forum | Mon May 09 16:44:33 EDT 2011 | dcell_1t
Hi, We have been struggling with an issue of non wetting on a QFP (Renesas - 256, Sn90Pb10) but the issue "desapears" sometimes for a while and then back again suddenly. This is the scenario: Component: QFP 256 / Renesas / Sn90Pb10 / 0.5 mm pitch S
