Electronics Forum | Fri Apr 03 08:22:36 EST 1998 | Scott Cook
| At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash pro
Electronics Forum | Wed Mar 25 19:31:13 EST 1998 | Earl Moon
| | We are having some problems with "drawbridging" on 0805 film capacitors. | | We have already reduced the pad width from .050" to .040" based on input | | from vendor. Defects appear to be random as far as location on the PWB and direction | | o
Electronics Forum | Sun Mar 29 15:42:05 EST 1998 | Michael Fogel
| | | We are having some problems with "drawbridging" on 0805 film capacitors. | | | We have already reduced the pad width from .050" to .040" based on input | | | from vendor. Defects appear to be random as far as location on the PWB and direction
Electronics Forum | Mon Mar 30 07:44:12 EST 1998 | Earl Moon
| | | | | We are having some problems with "drawbridging" on 0805 film capacitors. | | | | We have already reduced the pad width from .050" to .040" based on input | | | | from vendor. Defects appear to be random as far as location on the PWB and d
Electronics Forum | Tue Mar 24 17:08:52 EST 1998 | Steve Gregory
David, There was a thread going on the IPC TechNet about exactly the same thing... The ratio that was posted is: Less than, or equal to 30-grams per square inch Which means if you weighed a part and it is 30-grams, you'll need .033" of surf
Electronics Forum | Thu Mar 19 13:30:49 EST 1998 | Earl Moon
| | | Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | | | 1
Electronics Forum | Thu Mar 19 13:41:43 EST 1998 | Justin Medernach
| | | | Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | | |
Electronics Forum | Thu Mar 19 13:53:07 EST 1998 | Earl Moon
| | | | | Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | |
Electronics Forum | Wed Mar 11 11:05:06 EST 1998 | Earl Moon
| I am having a problem with Entek coated boards. The solder past seem to just ball up on the pads. I had no problems with the board when it was hot air leveled. The board is double sided surface mount. I have tried adjusting the oven profiles mak
Electronics Forum | Sun Mar 15 23:58:01 EST 1998 | Phill Hunter
| | I am having a problem with Entek coated boards. The solder past seem to just ball up on the pads. I had no problems with the board when it was hot air leveled. The board is double sided surface mount. I have tried adjusting the oven profiles m