Electronics Forum | Fri Jun 03 12:44:46 EDT 2016 | cyber_wolf
"and most importantly inexpensive" Define inexpensive... I always get fired up about "expensive" Expensive compared to what is my question ? A car? a house? If you want what you are speaking of, you will be spending some coin. If you want, semi r
Electronics Forum | Tue May 17 13:10:50 EDT 2016 | rx8pilot
Thank you Bobpan - I tried that sequence but instead of LED's flashing - they were solid and it remains in 4mm mode. After looking closer at the feeders, it appears there are 'SlimPRO' and 'ThinPRO' versions. The ThinPRO version is what PPM manufactu
Electronics Forum | Tue Apr 11 13:01:36 EDT 2017 | mrich208
Yes Sir, someone had replaced the fuse with a resistor and it had burned up. We had an exact board on the VCD. We swapped them and it worked! I am not sure how this forum works but now the machine will zero and say it's missing a part but the sequ
Electronics Forum | Fri Jul 28 09:18:53 EDT 2017 | sumote
Fancort sells a router that will singulate the boards out of the panel, and smooth the edges at the same time. I had one of these at a previous job and it worked well enough. Programming is tedious (it is done at the machine by "learning" point to
Electronics Forum | Wed Oct 18 09:32:05 EDT 2017 | alexeis
Hi, Pick and Place file is included in CAD file. CAD file contains full information about a board including internal layers, silk, PAD/Component structure, and more. You can use Pick and Place (PnP) file on preparing SMT Programs. In case of small
Electronics Forum | Mon Oct 09 09:02:06 EDT 2017 | smtpatrick
I have used Mycronic MY500 & MY600 printers in the past. Wave goodbye to screens, it's really quick & easy to modify print programs, changes can be made and applied in 5 minutes instead of waiting 24 hours for a new screen. They print slower than a
Electronics Forum | Tue Oct 31 14:52:00 EDT 2017 | tschoen
Hello, I am seeking training for operation of an existing MY9 being used in a small prototyping lab... I'm a newb to operating a MY9. (The guy who knew anything here is "not accessible".) I the basic concepts and have seen the system operate, b
Electronics Forum | Mon Mar 26 08:10:26 EDT 2018 | mkamp
Hello All, I am currently conducting machine evaluations in order to choose the right machinery for a High-Mix Low-Volume SMT line. I am looking for any kind of information/evaluation on PnP machines as well as AOIs. In terms of high-flexibility P
Electronics Forum | Fri Aug 24 02:40:52 EDT 2018 | bukas
first check fuses in Y1 case. thats where EuroSYS cards are, and message you get tells you that cards can not communicate with main processing board in Y3 case via RS485. after that check cables and connectors. there are 4 EuroSYS cards in Y1 case, t
Electronics Forum | Thu Oct 11 15:18:32 EDT 2018 | dnachristen
I would suggest spending the extra money and getting the Mirtec. Simple to program, great support and reliable. We run 2 of these machines (MV3-L) 10 hours a day 6 days a week. Remember, you get what you pay for. If programmed correctly, the Mirte
