Electronics Forum | Thu Dec 02 17:42:35 EST 2004 | resslerr
The best solution is to use a software tool which offers program optimization, feeder set-up and line balancing even if different machine types are in the same line. Check out the leading solution provider: http://www.timmsweb.com In my view, your
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Wed Aug 10 08:47:49 EDT 2005 | dougs
you don't need different placement angles, not if you write the PD's properly, generate your programs from a source program and use the optimiser to split the progs up. so in theory the cad data can work although in practice it rarely does due to di
Electronics Forum | Fri Feb 09 02:41:12 EST 2007 | Muhammad Haris
1. Can X-Ray Inspection System damage the EPROM OR OTP during inspection after Reflow? 2. At 300 degree Centigrade, program in the EPROM OR OTP disturb. Is that true? 3. Sometimes, if some ICs couldn�t program first time then I put that IC in oven
Electronics Forum | Sun Mar 18 19:20:35 EDT 2007 | Eric Lim
We practice only store one program in a machine at one time to prevent operators from loading wrong program. It's not about loading production program slow but regarding after adjust(edit) the process parameter in the XP machine, the machine will pro
Electronics Forum | Mon Dec 03 15:38:24 EST 2007 | bigdaddysoy9
Why don't you create a seperate program using pads as fids. Then, the operators can load this program at the end of the run and print the boards with the bad fiducials. You don't have to keep altering the program, your boss can can go about his day b
Electronics Forum | Mon Jan 07 10:20:47 EST 2008 | remullis
I am looking into purchasing a used TR5300 and was wondering if anyone with experience on this model could tell me if you have the capability of importing programs from the older TR3100 dos based programs into the TR5300 windows based interface witho
Electronics Forum | Thu Feb 21 03:09:49 EST 2008 | jlawson
vPlan Studio is another great tool, can generate Fuji basic Programs or fully optimised programs, can convert from basic Centroid/gerber to all major EDA/CAM formats, can merge BOMS/AVLS and report problems and has great rotation correction tools so
Electronics Forum | Mon Sep 22 17:26:16 EDT 2008 | mikesewell
Right, you have to export to txt and import from txt. Export a working program and you'll see the program structure - fids, blocks, x/y/theta/partnumber, vision info associated with it. Doing this in Excel is....tedious. You don't need to go to te
Electronics Forum | Wed Oct 01 01:15:35 EDT 2008 | benefon
If you have your panel programmed as blocks (as opposed to expanded) two quick ways come to mind: 1. either use block badmarks to mark those blocks that you want to skip or 2. goto Block Repeat Info and mark and set the block that you want to skip as