Electronics Forum | Thu Oct 05 00:22:31 EDT 2006 | Dman97
Does any one know if it is possible to replace the stupid light pen on these machines with a standard mouse or trackball? I'm going crazy trying to get the damn thing to recognize any onscreen movements. Its like it has a mind of its own. Sometimes i
Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin
I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not
Electronics Forum | Thu Oct 05 15:58:16 EDT 2006 | SteveT
I would yield to bob on all Quad matters, but what I see here on a fresh install (we're upgrading a PC on one machine from a *386*) is that the new board name button is grayed out. That being the case, how do you create your first board? We'll be co
Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster
Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not
Electronics Forum | Wed Nov 08 08:59:54 EST 2006 | Amol Kane
well, if in the past you havent seen this issue, then something in the process has changed......as any good process engineer should do, investigate it.....new batch of paste?, expired paste?, clogged stencil?, change in programming parameters?, chang
Electronics Forum | Thu Nov 30 12:23:31 EST 2006 | John S.
Lou, There's nothing like working with it yourself. We went through this exercise several months ago. We evaluated MIRTec, YESTech, and MVP. We were looking at benchtop units, so all 3 companies were willing to send in a "demo" unit for 3 weeks.
Electronics Forum | Wed Nov 29 08:25:28 EST 2006 | aj
Hi, I work mainly with Fujis but have some experience with Panas. If you are seeing components upside down on the board it is feeder related . If you are seeing poor alignment across the board , firstly I would check the xy table for alignment. Mak
Electronics Forum | Tue Dec 19 16:15:47 EST 2006 | johnw
we have fuji's cp-iv-3 machine made in 1993.we > are facing problem everytime when we change the > jobs(for example we change from pcbA to pcbB to > pcbA)even though program is same. There are some > mechanical adjustments like conveyor adjusted
Electronics Forum | Thu Jan 11 14:27:30 EST 2007 | gregcr
I worked for a similar company. They had 4 GSM's. Most all of the GSM's software have a fairly straight forward way of importing data, it is just a matter of formating it correctly. I can't imaging using calipers to make a GSM placement program if
Electronics Forum | Fri Jan 05 15:10:15 EST 2007 | Bob R.
How about, "Who is the person who'll be called in to spend the weekend getting the machine back up and running after a crash? If it's your home phone number on the maintenance supervisor's speed dial then it's in your best interest to have a back up