Electronics Forum | Fri Nov 06 16:20:59 EST 2009 | 11562knott
I've speced in CircuitCAM at 3 different company's since 1996 and wouldn't use anything else. When we program our Mydata using CAD data within 5 minutes we have a program + a couple more minutes to verify the color visual aids by station. When we rec
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
Electronics Forum | Tue Feb 04 03:22:15 EST 2020 | tamasmagyar
You can do some changes on the fly on the machine, but is very limited. Like deleting a board from the panel, modifying offset, modifying fiducials etc. The thing is, I have issues with the programming interface, because the crashes and errors I get
Electronics Forum | Thu May 14 10:50:14 EDT 2009 | dnachristen
Hello, New to the site here. Have a few questions regarding Philips (Assembleon) Equipment and program transfer. We need the ability to transfer "Golden Programs" to and from the machines. I'm currently using AMS 2.0 with line control. I hooked up
Electronics Forum | Wed Feb 16 01:06:13 EST 2011 | vinitverma
Dear Gabe, Once you have the mount data in the program, you can move the camera automatically to the location by tracing each location one by one. If I remember it correctly it is done by having the location highlighted in the program and then by pr
Electronics Forum | Mon Apr 08 07:20:56 EDT 2013 | leemeyer
What operating system are you using ? I have found that you need to stay with a DOS based operating system. I am running DOS 6.2 with windows 3.11. I tried win 98 and although it seemed to run properly, I would have problems in the final program. XP
Electronics Forum | Wed Apr 10 15:05:23 EDT 2013 | microaide
I followed your instructions and did NOT select the option to break up the program for separate central controllers. I now have a program I can copy to central controller #1, and I can delete the head 2 data from the program. Now when I select RUN TH
Electronics Forum | Sat Aug 22 01:56:54 EDT 1998 | Lance A. Smalley
Panapro Host Optimization should actually be very good. Make sure you're not using a fixed setup or the feeder carriage will move alot. Also make sure you do not change parts data in the machine after the program has been generated or speed of the
Electronics Forum | Mon Aug 24 16:58:05 EDT 2009 | rgduval
Jack, Well, there's always doing it locally on the machine. There's also an old excel macro floating around that will help...it takes the x,y,theta information, and generates a pick and place program. However, we never had much luck with it here
Electronics Forum | Thu Oct 14 14:10:41 EDT 1999 | stefano bolleri
switch ALL your CAD/programming activity to F4G (throw away your current SW) --> buy a MCS-30, which you will use only to transmit programs to machines. Or does anybody know about a third-party SW that produces Fuji programs in CCIMF format? Or a co