Used SMT Equipment | Depanelizers / Routers
Serial Number : 20M09161033 LPKF ProtoMat C30s Circuit Board Plotter Working Area: 340 mm x 200 mm (13.4" x 7.8") Drilling Speed: 78 strokes/min. Travel Speed (max.): 1.575“ per sec. (40 mm/sec.) Note: NO COMPUTER INCLUDED ID# 112262 Include
Used SMT Equipment | CAD/CAM Systems & Software
LPKF ProtoMat S62 Circuit Board Plotter. This item is USED. Item is sold as pictured. Minimum track width: 4 mils (0.1 mm) Minimum isolation width: 4 mils (0.1 mm) Minimum drill hole diameter: 6 mils (0.15 mm) Working area (X/Y/Z): 9” x
Used SMT Equipment | CAD/CAM Systems & Software
LPKF ProtoMat S62 Circuit Board Plotter. This item is USED. Item is sold as pictured. Minimum track width: 4 mils (0.1 mm) Minimum isolation width: 4 mils (0.1 mm) Minimum drill hole diameter: 6 mils (0.15 mm) Working area (X/Y/Z): 9” x
Used SMT Equipment | AOI / Automated Optical Inspection
Viscom S3016 – Bottom-up AOI system inspects soldered connections on the printed circuit board bottom side without laboriously turning the board no flipper required. This system is typical German quality and has very little use as was on a proto line
Used SMT Equipment | Pick and Place/Feeders
This system is like new in every respect with ultra low cycle count. Used in clean room proto lab. Please contact for full details Large photos, video and to schedule a hands on inspection and production run.
Used SMT Equipment | Screen Printers
Dek Horizon late model only used for proto line work. Some features: * Large Board package, 620mm Long board option * Hawkeye 1700 Camera * 580mm large Blue Stencil cleaner * Auto paste dispence * 2Di Inspection * Gridlok Watch our mach
Used SMT Equipment | Soldering - Reflow
This oven was used in a proto-type environment and very minimal production use. Original owner states this oven to have less than 9,000 hours of use. Clean, presentable, well maintained. Heller 1800S Edge Rail & Mesh Conveyor 18" Mesh Conveyo
Used SMT Equipment | Pick and Place/Feeders
2008 vintage, Semi-auto printer, Autotronik / Manncorp MC384 flex mounter and IR Reflow oven, very little use (apx 1600 hours), great for batch runs or proto-type runs, MC384 has the paste dispense option which can eliminate the need for stencil prin
Used SMT Equipment | Soldering - Reflow
New arrival, like new condition. Proto-type, small batch LPKF Zelflow R04 Solder Paste Reflow Oven. Very minimal use. Powered up and tested. 220 - 240VAC single phase. FOB: Origin ALSO AVAILABLE: LPKF ZELPRINT LT300 BENCH TOP SOLDER PASTE PRIN
| 1 |
