Electronics Forum | Thu Jun 14 00:21:26 EDT 2012 | tech1
If you cannot put paste down with a stencil, have exhausted all other avenues on putting paste down and the MY500 is the only machine that can put the paste where you want it... Buy it.
Electronics Forum | Fri Oct 12 15:53:56 EDT 2018 | davef
SMTA-Shafiq On your cost per placement: Will the through-put of this new placement machine be greater than the current lowest through-put machine on your line? The lowest through-put machine should be your focus. On your reducing the BOM: Reducing
Electronics Forum | Fri Nov 30 08:35:51 EST 2007 | stepheniii
We put glue on the bottom of the board that already has the topside SMT mounted. We populate the board. We put it through a cure profile. At this stage the topside components are soldered on. The bottom side components are glued on with NO solder on
Electronics Forum | Tue May 04 18:52:31 EDT 2021 | lasmith132
3 more questions I promise. :) 1. If a populated PCB is put on a ESD safe Rack, is it able to be placed on a Plastic Shelf? 2. If a populated PCB is put in a covered ESD box, is it able to be placed on a Plastic Shelf? 3. Could we put ESD vinyl
Electronics Forum | Mon Feb 14 12:39:41 EST 2000 | Dave F
Francois: Sound like a messy process to me. Choice #1: Put only SMT parts on the primary side Choice #2: Put only SMT parts on the primary and secondary sides Choice #3: Put only SMT and PTH parts on the primary side Choice #4: Put only SMT and
Electronics Forum | Mon Jan 17 15:41:24 EST 2000 | Boca
Yeh, putting the threads together is a major plus to me too! Should be able to put a pun in there somewhere.... Thanks
Electronics Forum | Wed May 06 23:46:31 EDT 1998 | Thomas Nisbet
We want to insert LED's on .100 center's with a UIC Rad 2. The LED must have plastic standoff on the leads before they are inserted. Are there any tape & reel machines that will put the standoff on the LED and then put the component on tape & Reel. A
Electronics Forum | Mon Jun 01 12:31:35 EDT 1998 | Don Spicer
| We want to insert LED's on .100 center's | with a UIC Rad 2. The LED must have plastic | standoff on the leads before they are inserted. | Are there any tape & reel machines that will | put the standoff on the LED and then put the component | on ta
Electronics Forum | Sun Apr 07 18:21:08 EDT 2002 | murt
Hi I am a collage student and I was wondering if anyone could explain to me how you would estimate the trough-put, product and cycle time for a double-sided mixed technology pcb assembly. I would be grateful for any information Thanks Martin.
