Electronics Forum: pva and error (Page 1 of 12)

pva help

Electronics Forum | Wed May 09 04:50:07 EDT 2012 | indyr69

morning every one i have a problem with my pva machine. i get an error " power check fail" it does this when you try to run any program

samsung cp40cv handler error and vision error

Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3

hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).

samsung cp40cv handler error and vision error

Electronics Forum | Tue Feb 19 02:03:51 EST 2019 | bukas

try first to replace SYS folder, or one by one of its files. if that doesnt work you are looking at complete disk backup. and check disk for bad sectors ofc

samsung cp40cv handler error and vision error

Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan

This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.

Wiring Schematic Softwares and error checking

Electronics Forum | Sat Jul 19 12:22:55 EDT 2008 | operator

Are there any softwares OR functions inside of the softwares that allow a designer that is creating a very large complicated wiring diagram with say....many terminal blocks and connectors etc... to run a point to point check on his drawing? Bascially

Fuji GSP III machine not turning on and showing SO error

Electronics Forum | Sat Nov 07 18:38:32 EST 2020 | enzik

Hello to all, The Fuji GSP III screen printer was working well yesterday. This morning, the machine turned on and the display screen was showing nothing. I went to the back of the machine and reset one of the VM1152A. The display screen is now showi

a new installed Yxlon x-ray generator was installed and an error of under voltage primary appears , what suppose to be the probl

Electronics Forum | Wed Aug 16 03:17:51 EDT 2017 | khazzam01

Can any one tell me what to do , we install a new X-ray generator(YXLON) as a replacement but upon testing we encountered "undervoltage primary" error. Please tell me what to do?

a new installed Yxlon x-ray generator was installed and an error of under voltage primary appears , what suppose to be the probl

Electronics Forum | Wed Aug 16 12:57:14 EDT 2017 | dleeper

I would contact the manufacturer of your machine. X-Ray equipment isn't something you want to fool with if you don't know what your doing.

Conveyors and bar code

Electronics Forum | Thu Aug 24 16:08:18 EDT 2006 | Frank R.

Thanks Bill and Dave for your help, Sorry Dave if I didn't search for information in archives. After wave process we have 2 ICT, 2 AOI machines 4 PVA conformal coating machine that will be use on 3 different lines. The quind of automation I want to

Buying stenciling and pick and place equipement.

Electronics Forum | Fri Dec 17 18:21:43 EST 1999 | Clarissa L. Ortner

We are a small start up. We will be buying a stenciling machine and semi automated pick and place. ( We have the oven) We are presently stenciling without any assit and loading leadless parts only(no fine pitch) by hand. We need to improve thrupu

  1 2 3 4 5 6 7 8 9 10 Next

pva and error searches for Companies, Equipment, Machines, Suppliers & Information

Sell Your Used SMT & Test Equipment

Repair tools for all your electronic circuit board repair needs.
IPC Training & Certification - Blackfox

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven