Electronics Forum: qsa-30 and making and a and program (Page 1 of 6)

Suggestions for small and handy connector for in-circuit program

Electronics Forum | Mon Oct 24 09:07:58 EDT 2016 | robl

Could you make up your own adaptor cable to connect to your programmer, then fit a small form connector like a Firewire on the edge of the PCB? It should only take up about 7x7mm of real estate as opposed to a 2.54mm 5x2 pin header 12.7 x 5.08, or a

Advice Needed between a DEK 265GSX and a MPM UP3030!

Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin

I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not

MPM Up2000 and SMEMA

Electronics Forum | Tue Sep 13 10:00:27 EDT 2016 | awhite

Switched out the mech. relay on the board loader, no change. Same behavior. Could not find a mech. relay on the printer... SMEMA wiring appears go directly to a PCB. And it is at that point that I run out of talent. If the machine weren't dedicate

Board Stacking and Conveying

Electronics Forum | Mon Mar 26 09:41:03 EDT 2018 | fuji_user_2014

Hi Gurus, Looking for alternatives to line makeup after reflow oven. Currently, I have a continuous on flat belt conveying out of my reflow oven straight to an EOL bench. The operator manually picks up the board off the belt (there is a roller at t

Circuit cam and mydata

Electronics Forum | Thu Mar 26 13:31:37 EDT 2020 | rgduval

As everyone else said, if you don't have CAD, it's a pain to digitize the gerbers. So much so that we only did it once when I went to CircuitCam training. After you digitize the gerbers, you have to merge the BOM with it. And you have to tell it p

Pick and place labels

Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank

Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor

Circuit cam and mydata

Electronics Forum | Thu Apr 09 20:18:31 EDT 2020 | jlawson

Can not speak for CircuitCam is made by Aegis Software I veliveve sound like need to get understanding of how tool is supposed to work to extract-create centroid positions. Using Gerber Only is a pattern match and cacluate logic process - ie make pac

Circuit cam and mydata

Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice

> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett

Re: IPC and Nepcon

Electronics Forum | Wed Nov 18 14:42:22 EST 1998 | Dave F

| I heard somewhere that SMEMA has joined IPC, and that the association has decided to boycott Nepcon from | year 2000. Can anyone tell me if this is true | Nick: SMEMA and IPC are talking about merging (EP&P, 11/98, p 18). Below is a news release

JUKI KE2060R and KE2060L

Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox

R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp

  1 2 3 4 5 6 Next

qsa-30 and making and a and program searches for Companies, Equipment, Machines, Suppliers & Information

Selective Soldering Nozzles

High Throughput Reflow Oven
Selective soldering solutions with Jade soldering machine

Reflow Soldering 101 Training Course
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.