Electronics Forum: qsa-30 and program (Page 1 of 29)

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 13:02:50 EST 2006 | TR

We had a customer asking PFMEA and SPC/Cpk program. Our company did not have those in our system. Any help is appreciated.

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 14:04:30 EST 2006 | amol_kane

do u mean program as in software? Minitab can do all the basic statistical analysis for your data and give you Cp, Cpk Values. The Cp and Cpk values are derived from estimates from the data (hence necessary to have Confidence Intervals). Regards, Am

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 15:42:30 EST 2006 | russ

in addition to Amols comments I also like Minitab. For FMEA Ford motor Company has a great FMEA program

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 17:52:59 EST 2006 | slthomas

Is this a new customer or an old one? That's quite a lot to ask if you're not accustomed to performing those analyses.

PFMEA and SPC/Cpk program

Electronics Forum | Tue Mar 07 11:13:04 EST 2006 | Brian

Air Academy Associates has a nice SPC package that has the PFMEA calculations built in to it. It also does Cp/Cpk/regression analysis, MSA, et al.You can combine it with a reaally user friendly DOE software for about $250. Both use Excel. Brian

Trouble loading a program on Amistar 5630 and 5720

Electronics Forum | Tue Jun 13 08:27:19 EDT 2006 | wrongway

Hello Mark level 4 error need to header initialize its under program data as far as mdI01 error looks like a flag field error check the F field for the item codes or fiducial codes. MDI03 error fiducial mark is not aquired need to aquire the f

Trouble loading a program on Amistar 5630 and 5720

Electronics Forum | Mon Jun 12 10:46:37 EDT 2006 | mhanc

I am trying to help a customer with a problem. His Process Tech is out and the operator is trying to load a program via floppy. When trying to load on the Amistar 5630 the following errors occur: Data Type Error (level.4) we continue to load and

Suggestions for small and handy connector for in-circuit program

Electronics Forum | Mon Oct 24 05:43:52 EDT 2016 | zxcvb

I have many PCBs that use an AVR in SMD packaging, and since I frequently change the firmware in prototype boards, I'm trying to come with the best solution to program the AVR quickly and easily. The first approach was to have a standard header (2x5

Suggestions for small and handy connector for in-circuit program

Electronics Forum | Mon Oct 24 09:07:58 EDT 2016 | robl

Could you make up your own adaptor cable to connect to your programmer, then fit a small form connector like a Firewire on the edge of the PCB? It should only take up about 7x7mm of real estate as opposed to a 2.54mm 5x2 pin header 12.7 x 5.08, or a

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad

We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve

  1 2 3 4 5 6 7 8 9 10 Next

qsa-30 and program searches for Companies, Equipment, Machines, Suppliers & Information