Electronics Forum: qsa30 door open error (Page 1 of 1)

QUAD 4C motor error #5

Electronics Forum | Thu Aug 29 14:20:17 EDT 2013 | nophsem

Thanks for the response bobpan! LED's on the driver cards work well (green with doors closed and both red&green on with door open), and I don't use the carts. The head doesn't move after power on and inmediately you can listen alarm.

QUAD 4C motor error #5

Electronics Forum | Thu Aug 29 05:01:38 EDT 2013 | bobpan

Motor Error 5 is usually an interlock error. Take off the rear right cover and look at the red and green led's on the driver cards. If they are both lit....you have a door open or if you have carts....a feeder base switch is up. Good Luck

QUAD 4C motor error #5

Electronics Forum | Mon Jun 16 11:36:28 EDT 2014 | bobpan

Are both red and green leds on for the driver cards (they are located in the bottom right of the machine). If they are both on then you have an interlock opened. If this is the case....check the side doors....sometimes they are not shut all the way.

CAN'T OPEN ANC. invalid place position x

Electronics Forum | Sat Oct 24 23:26:43 EDT 2015 | thefinder

Hi. Have a problem with a QSA 30 machine. show me a error at the end of set up program. CAN'T ANC OPEN and then show me on the next row message. invalid place position x. if anyone has any suggestions please tell me.

Fuji cp6 servo amp alarm

Electronics Forum | Fri Sep 18 03:02:07 EDT 2015 | linux

Hello everyone. Need urgent help with our cp6, when front door is open servo amp alarm comes up, this error will clear using the reset button. Has anyone any idea how I would go about fixing this issue.


Electronics Forum | Wed Sep 25 13:25:13 EDT 2013 | nophsem

Hello bobpan: The machine is a QUAD 4C I turn on the machine and get the error: SRX AUTOBAUD Motor error #5 I removed the battery and then put it back in, the error remains. I removed the battery without put it back in...and turn on the machine,

Panasonoc CM602-L Problem

Electronics Forum | Tue Oct 20 12:02:47 EDT 2015 | cbeneat

I have never encountered that particular problem. Have you checked the door switches in the I/O to see if one is actually open? Another thing I have encountered is grease getting on the linear scale which will give you errors that are false. I wou

Strange problem with Fuji IP1 stopping

Electronics Forum | Thu Mar 30 13:27:53 EST 2006 | bvdb

Just before Christmas we bought a used Fuji IP1 cheap. It took us a while but it's been working great for about a month. Yesterday the IP1 stopped after completing a board but before exiting the board out the conveyer. No error message, no alarm be


Electronics Forum | Fri Jul 17 07:50:32 EDT 2009 | csm

Dear Jepoy We check the oilmatic system and I found a relay is not working, it will arrive until tomorrow. We still have 2 errors and 1 message, we are taking time because we don't have the Fuji CP6-4000 manuals or electric diagrams. we get this ma


qsa30 door open error searches for Companies, Equipment, Machines, Suppliers & Information