Electronics Forum | Thu Apr 07 11:24:21 EDT 2022 | rasch
It's work on juki rs-1 ? this is dedicate nozzle or is the reworked standard nozzle ?
Electronics Forum | Fri Apr 01 08:42:03 EDT 2022 | rasch
Hi what Juki nozzle you use for xqeapa-00-0000-000000801 led?
Electronics Forum | Tue Apr 05 12:03:39 EDT 2022 | my3sons
Hello, we can offer you a great solution for handling these LED's which I'm betting are sticking to the nozzle after placement correct? We use a special tip material that doesn't stick...our part # 2014-2146 $450.00
Electronics Forum | Sat Apr 02 09:35:59 EDT 2022 | sophyluo1985
Hi,Rasch,I'm Quinn from GOLDLAND China.What do you need JUKI Noozle, we are JUKI experts. please send me your email。sales07@goldlandsmt.com
Electronics Forum | Mon Mar 22 10:24:14 EDT 2010 | mun4o
Hi , I think that our problem is humidity, because when I use leds from new tape ( pack in MBB ) no any defects.After that, we put opened tape in our store.After 2-3 weeks I use the same tape with leds, and we have 2-3% defective leds.I make this tes
Electronics Forum | Mon Mar 22 07:40:01 EDT 2010 | emanuel
Are you absolutely sure the problem is with the humidity? We had a problem with 3528 size leds, damaged by the pick and place nozzle because a 0.2mm mistake in the height measurement. Also, we found that several suppliers are using fake desiccant ba
Electronics Forum | Sun May 20 00:11:45 EDT 2012 | kiss
We are mounting 3528 package LEds with pick & > place machine.The problem is , nozzle picks up > the LED , but it stick to the nozzle & not > placed. Then it gives error in the next cycle. > Can anybody suggest the solution? Please advise on mo
Electronics Forum | Mon May 21 08:51:14 EDT 2012 | fredc
We have been seeing this in the nozzles we have made. We will building all new LED nozzles out of teflon where physically possible. Many of the new Cree LED recomendations are for teflon nozzles. In some that teflon was not recomended teflon was the
Electronics Forum | Sat May 19 04:09:17 EDT 2012 | gme
We are mounting 3528 package LEds with pick & place machine.The problem is , nozzle picks up the LED , but it stick to the nozzle & not placed. Then it gives error in the next cycle. Can anybody suggest the solution?
Electronics Forum | Mon May 21 09:00:19 EDT 2012 | mosborne1
Try switching to a polymer nozzle. Your machine manufacturer may sell them on any machine shop can mill you one. Also check to see if your pick and place had a puff off function. Some older machines have a mechanical adjustment on the mac valve used
winsouce.jpg)
.gif)
