Electronics Forum: quad and qsp2 (Page 1 of 15)

quad qsp-2

Electronics Forum | Mon Nov 29 18:23:19 EST 2010 | comprep

Has anyone had any success with placing BGAs with the Quad QSP-2? We have been having alignment issues with BGA placement but our placement of 0402 parts is dead on. We have worked through the calibration and it seems to be correct.

quad qsp-2

Electronics Forum | Thu Jun 12 10:55:02 EDT 2014 | lightinguk

Hi can some tell me how the setup the rt computer on the quad qsp2 , rt computer is not talking to the qsoft computer has anyone got any ideas ?

quad qsp

Electronics Forum | Wed Jun 30 21:27:15 EDT 2010 | comprep

I need some info on a xp upgrade for a quad qsp2 dose it have aney binifit over win 98.

quad qsp-2

Electronics Forum | Thu Jun 12 11:04:48 EDT 2014 | bobpan

You could have a bad hard drive or the bios settings could be incorrect. We also need to find out what motherboard version you have. Please e-mail me for further help. Go to: www.precision-repairs.com and my e-mail address is on the site. Bob

quad qsp-2

Electronics Forum | Tue Nov 30 06:33:44 EST 2010 | jmw

If you are using the upward camera then you probably have to put in a placement offset for each head. This only effects upward camera placements...not quadalign. This is located in: 1. machine-calibration-camera lens 2. Choose upward camera2 under "

Advice on used pick and place machine

Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad

We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve

Quad QSP-2 manuals needed

Electronics Forum | Wed Nov 07 20:20:58 EST 2018 | bbqstorm

Looking for all manuals and training info available for a Quad qsp-2 thanks

New Pick and Place Operation

Electronics Forum | Thu Jun 03 13:11:02 EDT 2004 | Scott B

We had an existing Mydata MY15 line and inherited 2 Quad lines (QSP2 and QSX1). We eventually had to get rid of the 2 Quads (major software and hardware issues) and have replaced these two machines with an addition single Mydata MY15 and are getting

Multitroniks, Quad System and Tyco Info

Electronics Forum | Wed Aug 01 01:35:22 EDT 2001 | DL

Jay, I agree with your assement and Chips on the Quads. I once worked at a shop that had Quads and DynaPerts(at the time) The perts were slower(TIME) and required(EFFORT/PEOPLE) more MAINTENANCE(more effort more people and more requirements!!!). I'v

Quad QSP2 Training

Electronics Forum | Mon Jun 22 11:19:26 EDT 2009 | phase1

We are looking for an individual who knows how to operate and program a Quad QSP2 machine. We are located in Rockville Maryland. Machine was bought at an auction some time ago and we need it up and running. Payment can be discussed with David. 301 27

  1 2 3 4 5 6 7 8 9 10 Next

quad and qsp2 searches for Companies, Equipment, Machines, Suppliers & Information