Electronics Forum | Fri Feb 01 07:29:55 EST 2019 | dfl
oh! Please let me know if you find that info, it would be great to have a spare that can be plugged anywhere. You never know when some of these old cards will fail. Thanks bobpan!
Electronics Forum | Fri Apr 05 20:00:08 EDT 2013 | microaide
I cheated on the escapement length for the SOLIC plate and got through Feeder Optimization and Generate Program without any errors. Some progress, but no I cant figure out how to the the generated program into the central controllers on the Quad IVc
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o
Electronics Forum | Wed Oct 02 23:09:51 EDT 2013 | marcelorotofrance
Ok, I'll try it. In the meantime I overcame the problem by downloading the original program to the machine and tought the new placements, board size and repeats and then uploaded it to the new file and edited the rest on CC. It worked fine, no strang
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Thu Apr 17 16:55:32 EDT 2014 | bobpan
Hello, The only thing i can think of is the x&y ribbon cables. I know you said they are good but they could have an intermittent break. I would get a spare set and plug them in with the machine at a slow speed setting and see if it works as normal. A
| 1 |
