Electronics Forum | Fri May 18 12:42:50 EDT 2018 | arachid
Hi, i search for drawing of calibration slug to calibrate a vu4/6 vision system on a quad 4c. on my manual it is name spindle runout calibration slug but not have part number. if you can give me this drawing i will very apreciate it. I need picture,
Electronics Forum | Thu May 20 09:47:25 EDT 2010 | pforister
Is this a single head Quad IVc or a dual headed line? if it is a dual line you can swap the align cards in the front bay between the two heads and see if the symptom follows. The card on the far right is a transport card, shouldn't need to swap tha
Electronics Forum | Mon Mar 28 10:26:55 EDT 2011 | miroyu
Hello everyone . I received lot of help from people of this forum for which I want to say "thank you" guys. I had problem whit initialization of my Quad 4C which just sits for 2 years after purchase. I manage to locate problem with laser diode on pla
Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad
We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve
Electronics Forum | Wed Feb 13 14:41:23 EST 2013 | brantco
is there any way to upgrade the video on a Quad IVC to use VGA
Electronics Forum | Mon Jun 17 06:56:50 EDT 2013 | bobpan
Did you teach the reject mark? Sounds like a lighting issue when looking for the white sticker. You can also skip images by pressing control-repeat after the machine has found fiducials. Good luck
Electronics Forum | Fri Feb 19 09:48:28 EST 2010 | navworx
We're looking at a QUAD IVc for our prototyping lab. I've had offers on several IVc, but one dealer wants to sell us a IIC. Are these units truly compatible? Do the feeds for the IVC work in the IIC and vice-versa? How about resale value - which
Electronics Forum | Fri Jun 14 05:49:32 EDT 2013 | rollon65
Hi all. I used a 5/16" white paper sticker to mark a reject PCB in a panel of 10. One of my my Quad 4Cs sees it O.K. and marks the PCBs reject. The other machine either shows them all reject or shows the marked one as good and the other 9 as rejec
Electronics Forum | Fri Aug 02 16:02:28 EDT 2019 | slthomas
I can't answer your question as it's been way too long since I did any Quad IVc work, but at some point bobpan will probably reply and give you exactly what you need.
Electronics Forum | Wed Jun 19 07:24:10 EDT 2013 | bobpan
Hello Rollon, There needs to be a contrast between the sticker and board. The manual gives and example of a round red sticker. If you still cant still make this work.....Do the following. Run the machine and after it finds fiducials press stop on the
