Electronics Forum: quad qsp2 problems (Page 1 of 41)

quad qsp-2

Electronics Forum | Mon Nov 29 18:23:19 EST 2010 | comprep

Has anyone had any success with placing BGAs with the Quad QSP-2? We have been having alignment issues with BGA placement but our placement of 0402 parts is dead on. We have worked through the calibration and it seems to be correct.

quad qsp-2

Electronics Forum | Thu Jun 12 10:55:02 EDT 2014 | lightinguk

Hi can some tell me how the setup the rt computer on the quad qsp2 , rt computer is not talking to the qsoft computer has anyone got any ideas ?

quad qsp

Electronics Forum | Wed Jun 30 21:27:15 EDT 2010 | comprep

I need some info on a xp upgrade for a quad qsp2 dose it have aney binifit over win 98.

quad qsp-2

Electronics Forum | Thu Jun 12 11:04:48 EDT 2014 | bobpan

You could have a bad hard drive or the bios settings could be incorrect. We also need to find out what motherboard version you have. Please e-mail me for further help. Go to: www.precision-repairs.com and my e-mail address is on the site. Bob

quad qsp-2

Electronics Forum | Tue Nov 30 06:33:44 EST 2010 | jmw

If you are using the upward camera then you probably have to put in a placement offset for each head. This only effects upward camera placements...not quadalign. This is located in: 1. machine-calibration-camera lens 2. Choose upward camera2 under "

quad 4c

Electronics Forum | Mon Nov 18 12:07:02 EST 2002 | smckee

It would have to be really CHEAP! I ran one a few years ago, had 3 4C's gained together. Always had problem with the software and it was a high maintenance machine. Never had such problems with Mydata, Phillips or Zevatech. Also, it seemed I alwa

quad 4c

Electronics Forum | Fri Nov 29 08:36:07 EST 2002 | Jeff Park

They have there strong points and weak ones. I have worked with them for the last 5 years and have seen some flakey problems (Cables, feeders, encoders) that will cause you some down time but if you get a good price on a system it might be worth it.

quad 4c

Electronics Forum | Wed Nov 27 18:10:41 EST 2002 | andrewbrook

Quad4C's have their moments. If the price is right and you are aware of the machines limitations then you will be satisfied. The placement rate is slow, 1.2 seconds/chip. Don't buy any Quad if it has the CyberOptics Laser unit, the Quadalign unit is

quad qsv-1 gantry - quad align issues

Electronics Forum | Wed Jan 23 14:30:09 EST 2008 | operator

Additionally, I have seen the bad align error from incorrect pickup Z. Quad align can freak out sometimes if it sees something it doesn't like. If all else fails I just reboot and 99% of the time the problem goes away.

quad qsv-1 gantry - quad align issues

Electronics Forum | Wed Jan 23 15:13:54 EST 2008 | tbkonrad

It's not the z pickup or profile bot thanks for the help, I think Mike is right. I have used these profiles hundreds if not thousands of times in the past and never had an issue. Also it was different components and different profiles almost every ti

  1 2 3 4 5 6 7 8 9 10 Next

quad qsp2 problems searches for Companies, Equipment, Machines, Suppliers & Information

Selective soldering solutions with Jade soldering machine

High Precision Fluid Dispensers
convection smt reflow ovens

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

World's Best Reflow Oven Customizable for Unique Applications
Sell Your Used SMT & Test Equipment

Wave Soldering 101 Training Course
Professional technical team,good service, ready to ship- Various brands pick and place machine!

Thermal Transfer Materials.