Electronics Forum: rail (Page 26 of 39)


Electronics Forum | Sat Aug 26 10:28:05 EDT 2006 | Ola

Hi, this is not a solution for your o-ring "belt" problem but a guideline for the future on an o-ring "belt" (wrong word as it is Not a belt) conveyor. These crazy O-rings have a small radius which makes it somtetimes hard to do a conveyor width adju

Temperature variation Heller 1707 EXL

Electronics Forum | Tue Aug 13 10:09:10 EDT 2013 | dyoungquist

We have a Heller 1707EXL that we use for lead and lead-free production. It has both a mesh belt and edge rails. We run 90% of our assemblies on the mesh belt (leaving the edge rails wide open). I have noticed when profiling a board on the mesh bel

my12 motor amplifier channel a error

Electronics Forum | Fri Jan 10 11:32:52 EST 2014 | rgduval

Hi, Hans, I would have suggested swapping the MOT card out to see if that fixes the issue (or, changing the MOT card with another one to isolate the card), but, it sounds like you've already done that. I'm surprised that MyData would point you towa

Flason SMT Products

Electronics Forum | Wed Oct 03 23:42:32 EDT 2018 | gaintstar

SMT Reflow Oven Factory http://www.flason-smt.com/product/SMT-Reflow-Oven-Factory.html Introduction of SMT Reflow Oven Factory: 1. Windows XP platform, user friendly interface and easily swap between bilingual of English & Chinese. 2. Digital contr

Soltech Sorrows...

Electronics Forum | Sat Mar 06 18:09:31 EST 1999 | Steve Gregory

Hi Ya'll... I'm in here again today trying to deal with my down wave solder. I've been beatin' my head against the wall for the last couple of days, it's a Soltec Prisma and the conveyer keeps jamming. What it's doing is up at the exit end where th

Re: 6241B VCD Insertion Machine Problem

Electronics Forum | Sat Apr 25 01:26:52 EDT 1998 | Mikec

I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking


Electronics Forum | Fri Jul 24 12:02:06 EDT 1998 | Steve Gregory

Stoney, One thing you might do before you start dispensing epoxy, (...I know this might be a bit of a pain) is to run your boards on the mesh belt instead of the edge-rail conveyer. I used to have to do that with some very,very dense double sided mem

Re: Tombstones

Electronics Forum | Thu Aug 06 13:02:11 EDT 1998 | Brian Stumm

Tombstoning is often caused by non-uniform heating. I suggest you check you profile to ensure you still have uniform heating and also check your rise and cool rates. If you have a convection oven I would look into the fan speeds or airflow rate throu

Re: Modification of Fuji machine

Electronics Forum | Thu Oct 29 01:21:38 EST 1998 | Erhard

Thinking about that 180� turn unit again: You wouldn't require the the y-movement. The fixed side gets turned over to the other side anyways. My suggestion would also be to leave the Fuji direction the way it is. (It's more standard anyways?) and

Re: vibration during solder reflow

Electronics Forum | Fri May 21 12:25:14 EDT 1999 | Dave F

Has anyone had any experience or data using vibration during the reflow process. We introduced a vibration device attached to the fixed rail on a Vitronics reflow oven. The reason was to prevent skewing on large PLCC devices. The process worked v

rail searches for Companies, Equipment, Machines, Suppliers & Information