Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Sat Sep 16 03:09:35 EDT 2000 | Sartor
I am in trouble with gold finger cleaning and repairing.Can anyone recommend good solutions?Also,can anyone recommend a good flux paste source(s)?Thanks.
Electronics Forum | Sat Nov 07 18:18:58 EST 2015 | ttheis
Hi everyone, We just got our first wave soldering machine operational (novastar 8s) and its working great. I'm just a little unsure about how to best maintain the foam fluxer daily. Do you drain it from the machine each day or just cover the flux t
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Electronics Forum | Thu May 12 14:03:38 EDT 2016 | chemers
Does anyone have an equipment recommendation for stencil cleaner brand/type that they would recommend for no-clean pastes? I have used ultrasonic cleaners in the past with aqueous pastes, but I don't want to buy something that really won't work for u
Electronics Forum | Wed May 23 15:11:21 EDT 2018 | jacobidiego
Hi experts, I asked our chinese board manufacturer about their recommended procedure to clean miss-printing. The answer was that they use Absolut Alcohol while use IPA currently and we are moving to a water based cleaning agent with ultrasound. Th
Electronics Forum | Tue Oct 11 10:49:14 EDT 2005 | jhagve
HI We start to make a product which have a 0.4 mm pitch IC and start having problems with not enough solder printed, to solve this problem we had to increase the manual cleaning, now we are cleaning the stencil every 8 printings, before we was runnin
Electronics Forum | Tue Oct 09 12:23:07 EDT 2001 | Mike Konrad
Hi Danial, Yes, you can use one cleaning chemistry for all paste types. There are many available chemistries from many manufacturers. The chemistries that I would recommend include: StencilWash Plus from Aqueous Technologies http://www.aqueouste
Electronics Forum | Fri Oct 14 14:09:19 EDT 2005 | bschreiber
Your problem is not the 0.4 pitch. Your problem is the manual cleaning. Manual cleaning will only remove the solder paste from the surface of the stencil. What's more, manual cleaning will force additional contamination into the 0.4 pitch apertures
Electronics Forum | Wed Mar 08 14:11:38 EST 2006 | mholz
I am looking for an industry standard �stock� note to place on our printed circuit board assembly drawings that will capture a level of cleanliness for an IPC-A-610 class 2 board assembly. I�m looking for some quantitative spec for cleanliness that w
.gif)
