Electronics Forum | Fri Nov 09 16:57:27 EST 2001 | davef
Sure, it�s fine to use the proper amount of flux and no solder when reworking BGA. Recognize that these new solder connections have less metal and a lower standoff than similar BGA solder connections that have not been reworked. This undoubtedly
Electronics Forum | Thu Mar 18 16:39:14 EST 2004 | Jed Johnson
A few good points have been made here: The profile could be ramping too fast. The profile could be gettting too hot. The profile may need to have more "soak" time before reflow to allow the board temperatue to equalize and the board to "relax" and st
Electronics Forum | Mon May 27 12:14:35 EDT 2002 | arcandspark
I use the exact same paste flux that we use in our solder paste for SMT manufacturing with great success. I have also had great success using the Air Vac DRS Hot Gas units with the same size BGA's. If to much heat is applied to fast to the BGA be it
Electronics Forum | Tue Aug 31 07:51:45 EDT 2004 | Six Sigma QE
Our supplier is suggesting the 'removal and replacement' of programmable IC components to reduce cost. The removed components will be placed on other boards as well. Is there a risk in reworking programable IC components. Thank you.
Electronics Forum | Wed Jul 17 11:45:48 EDT 2002 | fmonette
The current IPC/JEDEC standard J-STD-033 for moisture-sensitive devices does not include a bake cycle at 90C (it includes cycles at 40C and 125C for non-assembled components in reels or trays). However, the upcoming revision, which should be release
Electronics Forum | Tue Jan 17 21:31:48 EST 2006 | KEN
Agreed. Some research sugests the "flexibility" of the joint(s) is reduced with flux only resulting in premature failure as compared to standard paste + ball reflow processes. However, this does not mean it is not a reliable method. Relibility req
Electronics Forum | Wed Aug 23 10:41:28 EDT 2006 | jdengler
You could try some of the companies that advertise on this forum. Some of the manufacturers offer demo units at a reduced price. Jerry
Electronics Forum | Mon Jan 16 16:19:22 EST 2006 | davef
Dunno. 4% higher standoff results in 16% higher reliability [�The Effects of Solder Joint Voiding on Plastic Ball Grid Array Reliability� Banks, Donald R., et al.; Proceedings of the Technical Program - Surface Mount International; September 10-12,
Electronics Forum | Tue Apr 09 15:23:05 EDT 2002 | Alan W.
I have recently signed onto a company with very little board assembly experience. I am trying to develop a process control and continuous process improvement program for a new surface mount line, but have run into several people who are not really i
Electronics Forum | Tue Apr 09 15:24:10 EDT 2002 | Alan W.
I have recently signed onto a company with very little board assembly experience. I am trying to develop a process control and continuous process improvement program for a new surface mount line, but have run into several people who are not really i
