Electronics Forum | Fri Mar 18 14:27:29 EST 2005 | pmd
Hold on, MyData can place no component and not detect error if the minimum and maximinum settings in the centering phase are within the mesurement of the tool it'self. Especially if the levels are down between the jaws. For insurance make sure the to
Electronics Forum | Thu Jun 23 15:31:46 EDT 2005 | james
The ideas so far are good, but yet remember, we are running 4 different lines with "1" set of parts that are never removed from the feeders. We can not get purchasing to buy extra reels of the of the most used parts, and these parts travel from line
Electronics Forum | Wed Jul 27 22:43:10 EDT 2005 | crishan
Hi all, Having a major problem with an IC being placed upside down. We pick up the fault at AOI. We have check several reels and the component is not placed upside down by the supplier. Where should I start looking; 1. Are we using an incorrect fee
Electronics Forum | Thu Jul 28 03:49:06 EDT 2005 | aj
Are you seeing many of the components in the reject bin of the machine? If it is feeder related I would expect to see some rejects unless the part is jumping and landing in the same orientation i.e. 3 leads on same side everytime! Other than that I
Electronics Forum | Mon Aug 01 18:33:21 EDT 2005 | crishan
Hi All, We are not using a Vib. bowl feeder, or stick feeder, these parts are on a reel. The pick & place machine we are using is a Panasonic brand YV100X, its a single head with 8 nozzles. What we are finding is that the component package size is
Electronics Forum | Tue Aug 02 22:44:42 EDT 2005 | crishan
Thanks for the comments everyone. I did not think of checking the nozzles material, I will check this out. GS, What is PBM, is this some sort of ironiser. Also to clarify, we believe the that the pocket size for the component is too big allowing th
Electronics Forum | Wed Aug 03 10:01:39 EDT 2005 | GS
Hi Crishan, sorry, "pbm" is a short way to say problem. In the past ('89), we had same magnetic pbm also with metal nozlles on Dynaper MPS-2500. Some time, we found also chips received from supllier already magnetized. Solution was to put the r
Electronics Forum | Wed Aug 24 22:53:34 EDT 2005 | mrduckmann2000
We have a customer that is using the new Hirose connector p/n df30fc-40dp-0.4v. The connector has lead spacing of .4mm. I beleive that if I have a stencil cut to 2-3 mil I should have enough solder paste to solder the connector to the PCB pads. Ho
Electronics Forum | Wed Oct 26 10:21:28 EDT 2005 | russ
We are also experiencing problems with this thick stiff paper tape. Our problem is the strength of the spring that supports the tape at its pick position. After a while it just pushes it down because the tape exit wants to bend the tape too sharply
Electronics Forum | Thu Oct 27 09:23:36 EDT 2005 | rlackey
Hi Russ, Kemet - http://www.kemet.com/kemet/web/homepage/kechome.nsf/vapubfilesname/F3102CE.pdf/$file/F3102CE.pdf You want page 29 of 30 of this PDF Murata - http://www.murata.com/catalog/c02e11.pdf Page 132 of the catalog, or 134 of the PDF.