Electronics Forum | Tue Apr 01 11:50:08 EST 2003 | rdr
Dave, thanks for the info. This sounds like it would verify the presence of an open. We have verified that these balls are open and I am trying to figure out if we are fracturing or not wetting. causing these opens. I would use the die method on ne
Electronics Forum | Mon Jan 19 14:54:38 EST 2004 | cyber_wolf
How did you come to the conclusion that you are having a cold joint problem. Just by appearance ? As Dave stated if you have any of the metals that he listed in the joints they will appear to be dull and grainy sometimes. But... Dave, I will have t
Electronics Forum | Tue Jul 13 01:00:03 EDT 2004 | Shean Dalton
Cleaning RMA fluxes simply requires selecting a washing chemistry (either Solvent, Semi-aqueous or Aqueous) and an appropriate cleaning sytem. Your lot size would be easily handled with a batch system. visit http://www.aat-corp.com/Technical/Def
Electronics Forum | Wed Oct 26 06:36:33 EDT 2005 | rlackey
Hi Ken, We would build a one off with an exact number of components on a different line, in a different manor completely to a volume, chipshooter job - however, we'd only really be doing a one off like that if it was a prototype as we're not in that
Electronics Forum | Wed Jan 24 11:24:07 EST 2007 | ruggi
I'm probably not telling you anything you don't already know, but a technique that's worked very well in the past for me is to methodically step through every part of the process and observe your boards being built, or take a scrap or simulated one a
Electronics Forum | Thu Aug 20 13:59:42 EDT 2009 | dcell_1t
Hi there! After various trial-error experiments we determined that two factors are the most insignificant in order to reduce or make worst the issue, those factors are: Placement force: regular placement vs "force applied" to dip the component on th
Electronics Forum | Sat Dec 30 04:23:50 EST 2023 | 012band
I have used LTS (Sn57.6%Bi0.4%Ag) solder balls for soldering on Ni/Au pads, and I have observed a wrinkle pattern on the ball surface. When you attempted soldering on CuOSP substrate pads under the same conditions, the surface appeared normal. Additi
Electronics Forum | Thu Jan 11 00:52:12 EST 2007 | behrsam
Mario, I tried a couple of profiles. In all cases the preheat ramps fairly slow, while the reflow utilizes the radiative heater to speed to reflow as quick as possible. I tried a quick profile and a slower one. The quick has about 15-20 sec at pre
Electronics Forum | Tue Aug 22 21:00:39 EDT 2006 | davef
National says: [ http://www.national.com/packaging/llp/faq.html#faq_manu ] Manufacturing FAQ's Are there any precautions that need to be taken with the LLP package? It is critical to follow National�s guidelines for successful surface moun
Electronics Forum | Wed Mar 04 10:36:10 EST 2009 | milroy
Hi If you mean your PCB stayed in the Reflow oven more than the reflow time required for the solder paste specs then I suggest to throw away the board because it would lead over heated solder joints all over the board. Think what could happen to an
.gif)
