Electronics Forum | Mon Sep 18 01:47:18 EDT 2017 | bukas
I would go with wire thickness + 0.4 to 0.8 mm for pad width, and pre-tinned lenght + 0.5mm what seems to me like problem is that it can easily roll off the pads in reflow oven
Electronics Forum | Fri Dec 01 13:30:08 EST 2017 | kojotssss
Stencil thickness is 4 mil. Via's are plugging from bottom. Gas may be developed under the component? Take Reflow Ovens Thermal Profiling changes? In your opinion?
Electronics Forum | Fri Nov 24 05:38:46 EST 2017 | jineshjpr
Can anybody suggest how to reduce 0402 LED tilting as I am using Convectional Reflow oven with 10 Heating zones and controlling the solder paste with 4.2 mills paste height
Electronics Forum | Wed Feb 14 15:37:48 EST 2018 | cbart
Do you mean in a reflow oven or wave solder? if so check your exhaust blower, make sure its still drawing. if not the flux/dust that builds up on the exhaust pipes may be falling into the machine.
Electronics Forum | Tue Mar 20 04:08:51 EDT 2018 | reckless
What pick and place machine do you recommend under $20,000? I would like to be getting 8,000-12,000 cph reliably and without much maintenance/labor/issues.
Electronics Forum | Thu Mar 22 12:07:58 EDT 2018 | reckless
I can get an Opal Xii for $19k or Juki 760 for $8k. Which one do you recommend? Both come with enough feeders.
Electronics Forum | Fri Mar 23 11:35:29 EDT 2018 | reckless
Not yet, but also have an option for a Universal GSMxs machine for $6k but only 5 feeders, fully upgraded 2 heads (1 brand new). I leaning against the Opal as its same speed as the Juki on paper for twice the price.
Electronics Forum | Tue Mar 27 04:56:39 EDT 2018 | reckless
What do you think of the Hanwha Techwin placement machines? I like their cph ratings but not sure how reliable and long lasting their machines are.
Electronics Forum | Tue Mar 27 11:10:15 EDT 2018 | reckless
Would you prefer a Samsung CP machine over a Juki? I like the CPH figures of the SM machines and would think about buying one used once I am up and running 100%.
Electronics Forum | Thu Apr 05 09:55:34 EDT 2018 | rob
The L Version is slightly bigger PCB handling capability. However, it's relative to Juki, not to other manufacturers. We have found that the extra large board Juki's are similar to our standard Yamahas. Don't know about the 760, but the 2060L is 41
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774