3193 reflow ovens results

Electronics Forum: reflow ovens (Page 96 of 320)

Nonwetting Components - why won't components wet to solder?

Electronics Forum | Fri Jan 26 09:49:53 EST 2007 | dyoungquist

You should have no problem using lead-free components with tin-lead solder. Is your reflow oven IR or hot air? If you are using an IR oven and the components are white or light colored, they may not be heating up enough for the solder to flow on

Need opinions/reviews on Madell Reflow Ovens

Electronics Forum | Wed Sep 19 13:44:46 EDT 2007 | russ

probably need to find out who really makes these ovens. This Madell company looks to be a reseller. personally I am very wary of these types of arrangements Russ

Reflow Oven & Surface Mount Machine Energy Consumption

Electronics Forum | Tue Jan 22 17:29:34 EST 2008 | fastek

Not quite correct Jon. Ovens will use roughly 1/2 their rated power consumption at temp. but will draw their rated max. power at startup.

Lab & Low Volume Reflow oven

Electronics Forum | Fri Nov 13 10:22:47 EST 2009 | reash

I see that same oven here: http://www.stencilsunlimited.com/product_info.php?products_id=132&tab=specs Does APS not actually manufacture it? Thanks!

Corrosion associated with degreaers

Electronics Forum | Wed Aug 04 16:30:44 EDT 2010 | dldavis

We are using a Propyl Bromide vapor degreaser solvent. Has anyone heard of this solvent when used near an oven will decompose and cause major corrosion to metals such as in a Reflow oven or a wave solder pot?

Reflow Oven Cool down

Electronics Forum | Fri Sep 17 11:20:24 EDT 2010 | SMTAZ

Our facility is typically a high mix low volume site, but lately we are getting increments on our requirements therefore we are kind of struggling to cool down our ovens before to change over a different recipe ... any suggestion on how to speed it u

Reflow Oven Cool down

Electronics Forum | Fri Sep 17 17:00:39 EDT 2010 | AL

we are using convection ovens and we face the issue when changing from Pb to RoHS but also even when change top side to bottom side if the diference on the profiles needs to go from a high temp to low, we are opening the hood but we would like not to

Heller Reflow Ovens and Tribol 1421 high temp chain oil

Electronics Forum | Fri Jan 21 11:28:39 EST 2011 | nucleartoast

I worked for Electrovert for 20 years and up till today the 1421 is still the oil of choice. The chain doesn't care who's oven it's running in but it does require regular lubrication.