Electronics Forum: reflow (Page 1 of 915)

Vibrating reflow

Electronics Forum | Wed Sep 17 08:41:28 EDT 2003 | caldon

In addition, I also think it would be detrimental in the double sided reflow process. Cal

SMT reflow

Electronics Forum | Fri Dec 12 03:50:09 EST 2003 | leonb

Is there anyone that can possible help repair an Iemme 760 reflow oven,

reflow oven

Electronics Forum | Mon Apr 11 08:55:49 EDT 2005 | greg

One more question. Is it realy worth to have reflow oven with nitrogen for lead free?. What are yours experiences? Greg

reflow profile

Electronics Forum | Tue Feb 19 09:24:25 EST 2019 | cyber_wolf

Reflow profiles are based on the product and materials you are soldering. You need profiling software and a data logger.

ENIG reflow

Electronics Forum | Mon Jul 12 07:47:41 EDT 2010 | rgduval

Talk to your paste manufacturer, they can recommend a reflow profile (as well as advise the paste activation temperature, and liquidous reflow points. The ENIG finish should not affect your reflow parameters any more than the solder paste. Typicall

2nd reflow

Electronics Forum | Thu Oct 26 14:51:46 EDT 2000 | eramirez

Currently I am running a very dense PCBA using a PCB less than 20 mils thick. We have two facilities running this product. One is using Nitrogen during reflow one is not. What is the advantage and disadvantages of using Nitrogen during the reflow

reflow profile

Electronics Forum | Thu Aug 24 08:59:38 EDT 2000 | Eugene Smelik

Dr. Lee, For Pb-free solders, will the reflow profile be similar to that of Sn/Pb, with an flux activation plateau before going to peak reflow, or will the profile be more linear in nature? Are there advantages/disadvantages to either profile for P

ENIG reflow

Electronics Forum | Mon Jul 12 13:24:38 EDT 2010 | tate350

Like robdg3 said, just check your paste spec and define your reflow profile accordingly. There should not be any major difference in reflow profile due to PCB finish.

reflow profile

Electronics Forum | Fri Sep 21 09:29:49 EDT 2001 | steven

when taking a reflow profile, can i attach the thermalcouple to the component body (using high temp tape) instead of to the leads (often found thermal couple dettached during reflow). in general, what is the temp diff between these 2 locatinos. if so

N2 reflow

Electronics Forum | Sun Oct 15 23:31:39 EDT 2000 | mkwong

I have a question for N2 reflow, I want to know how difference of the O2 PPM in reflow oven then get the result? Now, we use the N2 to purge into BTU oven and measure the O2 PPM is about 1,000. but cannot find the difference to compare to compress ai

  1 2 3 4 5 6 7 8 9 10 Next

reflow searches for Companies, Equipment, Machines, Suppliers & Information