Electronics Forum | Sun Jan 17 07:31:03 EST 2021 | bukas
check cable connections on front/rear feeder IF boards
Electronics Forum | Sun Jan 17 07:37:00 EST 2021 | bukas
and i dont know where this image came from...
Electronics Forum | Mon Jan 18 12:26:37 EST 2021 | bukas
have you tried just cleaning connectors prior to IF board change? maybe it was just bad connection, that is main issue with machines in my experience.
Electronics Forum | Thu Apr 28 09:01:38 EDT 2022 | saberbouras
I have a solder paste fridge; my question is what is the type of this connector so I can use it to attach a warning light. And is it a power source or is it a dry contact relay output?
Electronics Forum | Fri May 13 20:32:39 EDT 2022 | swilson
Any Suggestions on How to remove oxidation on connector pins. The boards have been sitting for awhile and can't be washed due to transformers and open relays that are on the board.
Electronics Forum | Mon Sep 03 21:33:41 EDT 2018 | aemery
Jeff R, The "24VS" stands for 24VDC Voltage Switched; meaning that it is supplied under machine control and other things have to happen in the machine before 24VS is applied, in this case to KP1 coil. KP1 coil/contact is in place as part of the pow
Electronics Forum | Fri Oct 06 09:16:10 EDT 2000 | Kev Head
All, We are planning to place a daughter board that has a surface mount relay reflowed onto it already. The reason for doing this is a bit complicated and not worth noting here. The process would consist of first placing the SMT relays onto a mult
Electronics Forum | Fri Feb 02 08:36:14 EST 2007 | CK Flip
Wow, I cut first cut my teeth in the Industrial motor control industry. My 1st company made motor control products like variable speed drives, solid state overload relays, soft starts, etc. and in our shop, we used nothing BUT Dow Corning silicone p
Electronics Forum | Tue Mar 10 14:11:42 EDT 2009 | rodrigo
Ok I checked and here are the results... Z1 11CS3x Green LED on Q1 11cs4x Green LED on Z2 12cs3x Green LED off (This is the relay I mentioned in my original post). Q2 12cs4x Green LED on M1CR4x Green LED off The servopack SA-6 is the one with the
Electronics Forum | Tue Apr 08 08:01:35 EDT 2014 | cyber_wolf
So we had a ringblow pump blow up in our CP642. We replaced it and now we are getting hardware NG errors very intermittently.(2-4 times during and 8 hour shift) I see that the x-motor fan, cam motor fan,and oil cooler are all in this circuit. When i