Electronics Forum | Wed Jul 24 15:33:49 EDT 2019 | weglimir
Hello, We've got this DEK256GSX quite some time ago, and finally we've managed to start and initialize it. However the problem is that we don't know edit password, and re-seller that we initially bought this unit from doesn't know the password as w
Electronics Forum | Tue Jul 30 23:51:06 EDT 2019 | rob1
Have you tried entering "DEK" as the password?
Electronics Forum | Thu Mar 07 12:41:31 EST 2019 | rodrigo
Hi all, Our MCS30 hasn't been used for years because we use F4G now. Today I went to power up MCS30 because I need to transfer to F4G an old program but MSC30 is not working. It said all boot devices failed. We found a dead backup battery in one of t
Electronics Forum | Fri Jul 26 16:40:35 EDT 2019 | mdemerse1
http://islandsmt.com/wp-content/uploads/2017/02/Dek-265GSX-User-Manual.pdf"" target="_blank">http://islandsmt.com/wp-content/uploads/2017/02/Dek-265GSX-User-Manual.pdf"" target="_blank">http://islandsmt.com/wp-cont
Electronics Forum | Sat Oct 29 14:36:05 EDT 2011 | tech1
call mydata
Electronics Forum | Sat Oct 29 02:13:27 EDT 2011 | darrenj
Hi, We had a video-related problem and I had to shutdown the machine a few times un-expectedly. Now, the video seems to be fixed (bios config problem), but the machine boots up and says that the serial number is -1 which does not match the calibrati
Electronics Forum | Thu Apr 12 15:21:12 EDT 2012 | jdengler
Have you tried to do a reset start? When Fuji's act weird the first place to start is a reset start, then re-load the Proper Status and Program. Jerry
Electronics Forum | Thu Mar 29 11:57:33 EDT 2018 | vgridchin
We buy a used CP45FV cant enter to Sys. Setup menu. Is it possible to reset password?
Electronics Forum | Thu Mar 22 17:18:17 EDT 2018 | rodrigo
Hi all, Our (new/used) CP642 resets the nozzles heads first time I do a nozzle centering after power on. But we're getting errors st17 and st19 and while working on the sensors I noticed that it does not resets the heads before I start a nozzle cent
Electronics Forum | Mon Apr 02 02:03:42 EDT 2018 | bukas
it should be 1 by default...