Electronics Forum: revision and changes (Page 1 of 31)

Programming for Pick & Place and AOI machines

Electronics Forum | Tue Jul 25 14:18:21 EDT 2017 | emeto

John, programming can be done easier, but you have to pay the price somewhere. I would recommend using the following sequence if you see a lot of new products all the time. 1. Use your own part number system. With these numbers you will fill up you

Humidity and temperature

Electronics Forum | Thu Sep 15 08:39:10 EDT 2016 | davef

J-STD-001 Revision F with Amendment 1

Re: Adhesive Dispenser Vs. Screen Printing Adhesives Pros and Cons

Electronics Forum | Tue Oct 03 20:35:23 EDT 2000 | Dave F

1. Throughput * Dispenser: Slower, may loose 70% of tact on fast chip shooters * Printer: Can be put in front of and use fast chip shooters effectively 2. Rework Rate ???? Deposition control???? * Dispenser - High control over amount paste - Coplan

IPC 610 and J-STD Rev D - What's it all About?

Electronics Forum | Thu Mar 03 16:41:11 EST 2005 | davef

According to an on-line posting ... SMTA On-line Presentation Comparing Industry Standard Revisions March 9: IPC-A-610 with Regards to Lead-free Technology There have been extensive and significant changes to the industry standard IPC-A-610 with th

SMT Processing and gasketing

Electronics Forum | Tue Nov 11 16:30:08 EST 2008 | naynayno

Occasionally solder mask thickness is believed to be the cause of gasketing challenges during paste printing. We currently specific IPC-SM-840 on our fab drawings but this provides no limits or guidelines on thickness. I do not want to cause an unr

Re: Siemens HS50 and F5 and S25

Electronics Forum | Tue Nov 28 16:28:14 EST 2000 | CAL

Chris- The machines you identified are stable products and have been around for over two years now and most bugs have been worked out. The F5 IC head has not changed much since its introduction over 5 years ago. Remember these machine like to run, r

Bow and twist of PCB's

Electronics Forum | Fri Apr 20 07:12:22 EDT 2001 | wbu

Dougie, oh yes, it�s a bit short that chapter. I have the Revision e in front of me and this one contains in the appendix the needed IPC-TM-650 Test method for bow and twist. Can�t think that they don�t have that in the new revision. Hope you find

small and good pick and place machine

Electronics Forum | Thu Sep 05 23:18:03 EDT 2013 | feiyangniao

There is a new toy I received today: a NeoDen TM-240A automatic desktop pick and place machine! I’ve kept my eyes on this baby for a quite a while, and finally decided to make a purchase last week. The shipping was very fast: DHL from China, a total

Conveyors and bar code

Electronics Forum | Wed Aug 23 14:59:32 EDT 2006 | bill

I�ve been lurking on the forum for a while so I will take a stab at this, mainly because there is no answer I take it that you have a variety of boards being produced at the same time and are in fixtures so the conveyors don�t need to be adjusted, a

pick and place vaccum

Electronics Forum | Mon Nov 10 13:27:07 EST 2008 | evtimov

Hi janz, you should be aware of everything. You are going to change subsystem on your machine. How much vacuum you need on the machine? Can you control the vacuum level with your system? Can you control the the system at all? Is it really much more

  1 2 3 4 5 6 7 8 9 10 Next

revision and changes searches for Companies, Equipment, Machines, Suppliers & Information