Electronics Forum | Thu Jan 27 11:45:04 EST 2005 | Mark
Based on the components mentioned, it sounds like you need a soldering station rather than a bga rework station. The equipment mentioned would allow you to rework fine pitch QFPs and BGAs. Reworking an sot-23 using one of those systems is inefficie
Electronics Forum | Fri Mar 27 12:46:23 EDT 2020 | unisoft
Unisoft has been import gerber only for years to setup assembly, aoi machines, etc. *** Help for Importing GERBER only files for used in programming Assembly, AOI, Test, Selective Soldering machines (X/Y Center, Rot, Part#). Also allows you to cre
Electronics Forum | Thu May 30 10:31:03 EDT 2002 | robbied
Hi Yannick. This is an issue that we are just recently getting into but here is some ifo that I have gathered so far. I have seen/ used 2 different rework machines. The one we have bought is a 'PACE TF2000' which was at the lower cost end of the mar
Electronics Forum | Mon Jul 26 10:44:08 EDT 1999 | Boca
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Fri Apr 23 15:04:44 EDT 1999 | M.T.
| | Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. | | | | We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on t
Electronics Forum | Mon Jun 08 14:19:30 EDT 1998 | Gary Simbulan
Earl, et al, Boy things get old and cold around here fast. I promised more detail on my capactior problem and I thought I could drop something completely different in the same message and tell a tale of solder balls. First the caps. We still have
Electronics Forum | Sat Aug 15 07:56:16 EDT 1998 | Clyde F.
| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai PACE just came out with a new s
Electronics Forum | Thu Jan 21 19:38:24 EST 1999 | dean
| Hello, | | I will be evaluating and qualifying two equipment types. The first is a fountain soldering device. I need practical advice on all the stuff you guys and gals know about as good, bad, ugly, best applications, setup, limitations, and all
Electronics Forum | Thu Jan 21 20:22:02 EST 1999 | Earl Moon
| | Hello, | | | | I will be evaluating and qualifying two equipment types. The first is a fountain soldering device. I need practical advice on all the stuff you guys and gals know about as good, bad, ugly, best applications, setup, limitations, an
Electronics Forum | Mon Feb 26 14:06:09 EST 2001 | marting
We have just started to be involved with collumn grid array devices and are currently placing them by Universal GSM machinery. We have been advised by Universal that they supply "On Axis" cameras designed for visioning CGA devices, however the cost i
