Electronics Forum | Thu Oct 27 09:07:50 EDT 2005 | russ
Is anyone aware of the spec for tape if any?
Electronics Forum | Thu Oct 27 13:22:39 EDT 2005 | russ
Thanks for the spec Greg, For us it is the stiffness.
Electronics Forum | Thu Oct 27 14:17:49 EDT 2005 | james
I agree the stiffness is definately the problem.
Electronics Forum | Tue Oct 25 14:51:49 EDT 2005 | bobpan
5v or 12v feeders.....and are you sure the parts fit through the feeders and are not getting jammed. On some of the old feeders you had to remove the springs and other parts to make the tall caps work.... chow
Electronics Forum | Wed Oct 26 11:02:17 EDT 2005 | Rob
I wouldn't say we've escaped either - Fuji blade wear is heavily up at the moment.
Electronics Forum | Thu Oct 27 08:46:58 EDT 2005 | james
Yes I would have to agree Kemet is the worse. I believe our feeders are just not strong enough to handle the thickness of the tape. It seems to need alot of force to move and to roll the tape through.
Electronics Forum | Thu Oct 27 09:50:10 EDT 2005 | russ
Thanks Rob, Our tape does meet the Kemet spec but I am actually wondering if there is an EIA spec or something to compare to.
Electronics Forum | Tue Oct 25 14:20:52 EDT 2005 | james
Does anyone else encounter problems using feeders to handle caps that are reeled up with paper tape. We are having alot of problems with vendors that are now using the thicker type (like cardboard) to use to reel up caps. Our feeders either run too
Electronics Forum | Thu Oct 27 12:58:33 EDT 2005 | gregp
EIA-481-B Max tape thickness 1.1mm (not including bottom and top cover tapes which can be .1mm max each) Of course a 1.1mm thick piece of steel will be stiffer than a 1.1mm thick lasagna noodle (already cooked). Is the thickness the issue or is it t
Electronics Forum | Wed Oct 26 10:21:28 EDT 2005 | russ
We are also experiencing problems with this thick stiff paper tape. Our problem is the strength of the spring that supports the tape at its pick position. After a while it just pushes it down because the tape exit wants to bend the tape too sharply
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Building A, Jiepeng Square, Fuyong