Electronics Forum: riches (Page 1 of 15)

Dross produced, are we in or out?

Electronics Forum | Wed May 25 08:59:28 EDT 2005 | russ

Excellent Dave F! I was hoping that I wouldn't get "lead rich joint" for an answer.

Thru_hole component placement

Electronics Forum | Fri Jan 27 17:01:41 EST 2006 | solderman

oops, I mean 'Rich M', not 'Chris'!

Pick and Place vs CAD File

Electronics Forum | Sun Nov 26 11:03:16 EST 2017 | unisoft

> contact me for details at rlarue@unisoft-cim.com - rich larue

Pb free BGA and Sn Pb solder paste

Electronics Forum | Tue Jun 01 19:23:15 EDT 2004 | Ken

profile it for the tin/lead paste. The tin in the solder paste will begin to disolve the sac ball. This is exactly the same scenario as 90/10 (80/20)high temp balls found on ceramic bga and many super bga devices (except the sac balls are now tin r

BIRAL T&D Lubricant

Electronics Forum | Tue Apr 20 10:43:05 EDT 2010 | userrich

TO PURCHASE BIRAL Lubricants in the USA or Canada from the only factory direct and authorized distributor; CONTACT: RICH FITZGERALD pres. Advantage Dist., & Lubricants, LLC 3434 Marion Road SE Rochester, MN 55904 telephone 1-507-289-5555 1-800-42

BIRAL LUBRICANTS, GREASES, ANTI-SEIZE, SURFACE CLEANER OR OILS

Electronics Forum | Thu Aug 02 18:49:42 EDT 2018 | userrich

TO PURCHASE BIRAL Lubricants in America, Canada, or Mexico from the only factory direct and authorized distributor, find supplier information attached VENDOR SET UP INFORMATION Technical Corporate name is as follows; Advantage Dist., LLC 3434 Mario

Re: Qualifying products in process?

Electronics Forum | Wed Sep 13 20:44:26 EDT 2000 | Dave F

Good question * Rich lathrop at Heraeus wrote a good paper on quantifying the printability of adhesives. You can probably find it on their site. * J-STD-001 is the baseliine for qualifying processes. Good luck

Re: Flux tanks

Electronics Forum | Fri Nov 05 13:15:45 EST 1999 | John Thorup

Hi Rich It couldn't be simpler. www.binks.com Their main products are for paint and chemical spraying so it is likely that you will find a stock item that fulfills your need. good luck John Thorup

no-clean processes - are gloves necessary?

Electronics Forum | Thu Oct 21 09:09:07 EDT 1999 | Rich Scheleski

Does anyone have any info in regards to wearing gloves, finger cots in a no-clean process? Are there ionic contamination levels that validate the costs involved in setting up a system? Appreciate any feedback -Rich

moisture in pcb's how is it measured

Electronics Forum | Tue Oct 19 19:15:23 EDT 1999 | stephenmac

I would like to know how to measure the moisture in pcb's. I have experienced blowholes and am sure it is the board manufacturer. What is the limit and is there any way to correct the problem when moisture rich boards are already in your process. Th

  1 2 3 4 5 6 7 8 9 10 Next

riches searches for Companies, Equipment, Machines, Suppliers & Information



High Speed Precision In-Line SPI System - Mirtec MS-11
Flux-Free Reflow Soldering

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.
Large PCB Dispensing System

One-stop Platform For All Your Need For SMT - QYSMT
Golden Tech Electronics

ONLINE IPC Training & Certification