Electronics Forum: riser (Page 1 of 1)

Re: straddle mount connectors

Electronics Forum | Mon Jun 15 10:53:27 EDT 1998 | Process Engineer

| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector Automated and/or hand assembly?? Inline/offline configuration. Paste on both sides of connector pads?? Onse

SMEMA compatability

Electronics Forum | Tue Mar 30 12:10:31 EST 2004 | caldon

SMEMA is not just conveyor height. It also is Conveyor width, Edge Clearance, Tooling pins, Maximun Machine gap, and Lead in of conveyor. Additional, SMEMA is a machine communications Protocol for machine to machine or machine to conveyor communicati

mpm up2000 z axis sensor mount location needed

Electronics Forum | Mon Oct 07 16:07:22 EDT 2019 | ddfreeze

I have a silver aluminum z axis sensor that is not mounted, I need to know where it goes. The sensor has a picany rail type mount, triangular rail insert type. It is located in the board support nest area. Seems like it might go on the inside of the

SMEMA compatability

Electronics Forum | Wed Mar 31 10:16:01 EST 2004 | caldon

Being a former Apps Engineer I hear what yer saying. The 10" Leg Screw was hypothetically speaking about Siemens Machines. Since they do go lower the need for a 10" leg screw is needed. They do not use a 10" leg screw they use platform feet risers in

CSM Technical Question

Electronics Forum | Wed Oct 17 09:19:23 EDT 2007 | actech

This box has the I/O card mounted sideways under it's own cover on the side of the main box. The CPU card is the bottom card. The Two driver cards X/Y and R/Z are side by side and mount to a steel base pannel with there relays at the back. but even i


riser searches for Companies, Equipment, Machines, Suppliers & Information