Electronics Forum: roller and edge and conveyor (Page 1 of 1)

memory module conveyor belt and stacker

Electronics Forum | Tue Jan 05 21:01:40 EST 2021 | brianjones

We are looking at setting up a memory module conveyor belt with a stacker and de-stacker. I will need to handle DDR3 and DDR4 Long DIMM and SODIMM. I will be mounting an image camera under and over the modules. Looks like an edge conveyor would be be

Board Stacking and Conveying

Electronics Forum | Mon Mar 26 09:41:03 EDT 2018 | fuji_user_2014

Hi Gurus, Looking for alternatives to line makeup after reflow oven. Currently, I have a continuous on flat belt conveying out of my reflow oven straight to an EOL bench. The operator manually picks up the board off the belt (there is a roller at t

Board Stacking and Conveying

Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro

Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede

Re: BGAs and vapor phase

Electronics Forum | Mon Jul 19 11:50:47 EDT 1999 | Mario

Hi, SMTASSY that�s what we do, soldering our double-sided-finepitch-BGA-and all-the-other-stuff-boards in vapourphase because it�s the only thing we have. First, we do not do real series produktion, only prototyping up to sometimes 20 uni

Re: BGAs and vapor phase

Electronics Forum | Mon Jul 19 12:37:15 EDT 1999 | Wolfgang Busko

Hi, SMTASSY that�s what we do, soldering our double-sided-finepitch-BGA-and all-the-other-stuff-boards in vapourphase because it�s the only thing we have. First, we do not do real series produktion, only prototyping up to som

Re: BGAs and vapor phase

Electronics Forum | Tue Jul 20 05:29:14 EDT 1999 | Wolfgang Busko

Hi, SMTASSY that�s what we do, soldering our double-sided-finepitch-BGA-and all-the-other-stuff-boards in vapourphase because it�s the only thing we have. First, we do not do real series produktion, only prototypi

Foam fluxer maintenance, storage and cleaning

Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef

Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept

Re: Fountain Wave Soldering and Repair/Rework Equipment

Electronics Forum | Fri Jan 22 15:48:14 EST 1999 | Chrys

Hello, I will be evaluating and qualifying two equipment types. The first is a fountain soldering device. I need practical advice on all the stuff you guys and gals know about as good, bad, ugly, best applications, setup, limitations, and all

  1  

roller and edge and conveyor searches for Companies, Equipment, Machines, Suppliers & Information