Electronics Forum: route (Page 1 of 44)

Re: depaneling machines

Electronics Forum | Fri Dec 24 10:51:29 EST 1999 | Bob S

If you have decent volume with high mix or are a contract shop, the most flexible method is a software controlled router. Using pre routed boards with tabs is not a bad way to go but there is a price for the pre routing that may more than justify the

Routing feedrates for PCB�s

Electronics Forum | Sun Mar 18 20:48:23 EST 2001 | Doug Leaser

I�m doing some research in the field of routing, or cutting, PCB�s using a non-conventional method as compared to conventional routing machines. I need some accurate feedrates for routing certain PCB materials, as listed below, to compare data. Unf

Re: Conductor Edge Spacing

Electronics Forum | Tue Sep 26 20:50:06 EDT 2000 | Dave F

Right!!!! We have built product with via holes only 0.010" off the edge of the routed edge or even routed them in half, which usually adds cost and shorts to the chassis. Most high speed routing has a tolerance of +- 0.005". It's common for UL fi

Routing Under Chips

Electronics Forum | Thu Jul 03 15:03:39 EDT 2003 | Jim Nunns

My design group wants to change our route keep out around all SMT parts to 5 mil even under the parts with zero standoff. Are others in the industry routing under parts that have no standoff? My fear is that we will get shorting if the mask is scaped

Production Route Barcode Scanning

Electronics Forum | Sun Nov 04 01:20:38 EST 2018 | alexeis

Hi Rob, We have a solution, called DCollector, that works with serial numbers and route card. Also, if you have a fail, you must write it and serial can't continue in the route until you fixed it and report pass. If you want more information, plea

Laser Depaneling / Routing

Electronics Forum | Wed May 24 15:54:45 EDT 2006 | two cents

the cost

Fiducial reading routing Equipment.

Electronics Forum | Fri Feb 26 08:16:55 EST 1999 | Murph.

All, does anyone know of a CNC routing machine which reads fiducials? Do these things exist? Are there more questions than answers? Murph.

Re: Fiducial reading routing Equipment.

Electronics Forum | Fri Feb 26 11:44:41 EST 1999 | Wayne Bracy

All, does anyone know of a CNC routing machine which reads fiducials? Do these things exist? Are there more questions than answers? Murph. Murph: check out Cencorp routers might have what you are looking for. Wayne

Sony Routing Machine

Electronics Forum | Mon Jan 04 20:40:43 EST 1999 | Ken Mok

Does any one have some information on Sony routing machines? Do you know the website, the contact? Thanks.

Beyond Convention Routing?

Electronics Forum | Fri Apr 14 12:10:06 EDT 2006 | Nevets

Looking into options besides routing for a .032" thick board with components located near edges. Has anyone ever tried water jet cutting or other technologies for a high volume, high mix environment.

  1 2 3 4 5 6 7 8 9 10 Next

route searches for Companies, Equipment, Machines, Suppliers & Information