Electronics Forum: saki and inline and (Page 1 of 6)

MY15 and MY19

Electronics Forum | Sat Apr 17 02:24:10 EDT 2004 | D. Sanders

What are the lengths/depth/height of these two machines? They will be used in-line with conveyors. Thanks, Doug


Electronics Forum | Tue Jul 09 15:20:19 EDT 2002 | pjc

When you look at the capabilities of Combo machines they tend to sacrifice performance when compared to separate X-ray and AOI machines, meaning they don't do either the X-ray or AOI operations as well as a machine that was designed to do only one. A

Conveyors and bar code

Electronics Forum | Tue Aug 22 20:32:40 EDT 2006 | davef

Fixed position (mounted) [In-line] laser bar code scanners: * microscan 800.762.1149 info@microscan.com [Ken SMTnet] * symbol technologies symbol.com [Russ SMTnet] * Keyence and RVSI inline scanners [B Norman SMTnet] * Datalogic TC1100 bartec-systems

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany

Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >

GSM2 and FlexJet heads

Electronics Forum | Sun Oct 11 21:19:51 EDT 2009 | fulldrawmike

we have both flexjet and flexhead, we also have the new inline 7 head on some genesis dual beams we just put into operation. If you have a choice in flexjet heads take the inline 7. The flexjet 09 head is very labor intensive, stay away from them, e

MY15 and MY19

Electronics Forum | Wed Apr 28 23:18:09 EDT 2004 | Grant Petty

Hi, Ours are inline, and depending on how you have the conveyers, you might need to use the data sheets to work out placement. If your running the conveyers behind the machine, then most of the machine is in front of the conveyer, so they use more s

Wave flux and profiling

Electronics Forum | Mon Dec 18 13:00:47 EST 2006 | grantp

Hi, We have a white residue, which is visible, and we would like to have the produce clean as it's a PCI card, so users see the PCB. I am wondering if we need to install a cleaning stage to the line for these kinds of products. Can anyone give som

SMTECH pro's and con's

Electronics Forum | Wed Oct 10 16:50:44 EDT 2001 | jeff

The "UP100 " is currently built by Speedline. However only the models UP100S (No Vision and manual adjust table ) and the UP 100MV (Vision and manual adjust table). These are batch printers not in-line. The IS model has been out of production for ab

Wave flux and profiling

Electronics Forum | Mon Dec 18 14:36:09 EST 2006 | samir

Yikes!! In-line cleaning, to clean cosmetic and benign residues (from a NO-CLEAN) flux... You sure you can't switch fluxes? Another variable with residues is the solder mask. Depending on mask type (glossy, matte, semi-gloss, or semi-matte), will

GSM2 and FlexJet heads

Electronics Forum | Thu Mar 18 18:52:29 EDT 2010 | edwaterfall01

There is a retrofit kit to take care of the head cable problem that you mention. The s/n with 7P in it represents what is called the 7 Plus level of the head. There was one more level after that (09) for the GSM. The better heads mentioned in the

  1 2 3 4 5 6 Next

saki and inline and searches for Companies, Equipment, Machines, Suppliers & Information