Electronics Forum | Fri Aug 28 06:29:21 EDT 2015 | hich
I have a problem with placement repeatability on this Samtec connector TMM. The customer wants to use a TMM connector HORIZONTAL which has to be placed and stood almost upright and not leaning slightly forward. Anyway, does anybody else have this
Electronics Forum | Wed Jan 08 19:16:56 EST 2020 | spoiltforchoice
http://suddendocs.samtec.com/literature/em_tectalk8a_lr.pdf Even so its still a fairly manual process so I guess you really have to want to use this type of connector because its a whole process in itself and I bet the whole family is a special or
Electronics Forum | Tue Sep 07 09:03:23 EDT 2010 | davef
We don't use this part, but Samtec reflows it for their published durability tests. They published the reflow profile as part of the test report on the Samtec site.
Electronics Forum | Thu Nov 16 09:38:09 EST 2017 | vchauhan
I am curious to know anyone has used Samtec SEMA Solder Charge connector (SEARAY Seriese. I have done manufacturer's recommended solder paste and good reflow profile still the solder is leaching to the lead instead of becoming a solder connection. T
Electronics Forum | Tue Jan 14 10:41:49 EST 2020 | robl
Hi Arnel, I've used these before but with a 0.005" stencil. The key issue here was that the pins are actually a solder preform at the base that melts into the board - sort of BGA like, so too much paste can cause issues. Samtec have some great app
Electronics Forum | Tue Jan 14 11:39:51 EST 2020 | avillaro2020
Thanks Robl. I’ve contacted samtec followed their advice but ended up empty handed. Originally my stencil thickness is 6 mils, samtec stressed the need for the paste and charge to have good contact but this is challenged by the inherent charge non-co
Electronics Forum | Fri Mar 22 11:00:44 EST 2002 | davef
Like this, eh? http://www.samtec.com/suddenspecs/techspec.asp?series=tsm
Electronics Forum | Thu Aug 10 12:30:35 EDT 2023 | dimamalin
We are using a SAMTEC BGA connector.
Electronics Forum | Fri Sep 17 13:32:42 EDT 2010 | davidd1
AJ, I am the manager of Samtec's Interconnect Processing Group. The edge mount connector in question does present a set of unique assembly challenges but I am confident we can help you develop a process that fits your needs. Please contact our g
winsouce.jpg)
.gif)
