Electronics Forum: sanyo and nozzle (Page 1 of 14)

Max and Min nozzle settings on CP7

Electronics Forum | Sat Jul 24 04:02:18 EDT 2004 | kent_peterson

Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch

Max and Min nozzle settings on CP7

Electronics Forum | Sat Jul 24 04:02:21 EDT 2004 | kent_peterson

Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch

Max and Min nozzle settings on CP7

Electronics Forum | Mon Aug 02 13:06:10 EDT 2004 | jbabson1

If the CP7 is like the CP643, it defaults to the MAX size unless that nozzle is skipped. Then it would switch to the next smaller nozzle on that head.

Max and Min nozzle settings on CP7

Electronics Forum | Tue Jul 20 04:16:02 EDT 2004 | Charles Huang

Wondering if there any CP7/F4G programmers out there that can help me out with this one. I'm assuming the setting for max and min nozzle in the "environment" section of the part data would allow me to use either the specified max OR min nozzle in th

Pick and Place drops nozzles

Electronics Forum | Wed Jul 20 22:46:41 EDT 2005 | nozzles

we can supply nozzle for varies machine brand,such as fuji,sanyo and so on. welcome to inquiry that!thanks vera http://www.hkenterprise.com/szcomfaje tel:86-755-28091605 ext.805 eskimy1001@gmail.com

Mydata Pick and place

Electronics Forum | Sun Aug 26 12:40:59 EDT 2001 | stefwitt

I would like to enter the discussion by tossing some numbers in. First of all I don�t like the 3 Sigma value. 3 Sigma are 2000 defects per mio. if I remember correctly. This means, if you have 200 components on the board, then every 10 boards have on

Pick and Place Rivet

Electronics Forum | Wed Aug 13 17:39:27 EDT 2008 | awegener

In light of this new information I've received from everybody's comments, I'd like to get more information about pick and place nozzles. How can I learn more? ... What do the nozzles look like? Are there different shapes? What kind might you r

Pick and Place Nozzles

Electronics Forum | Mon Aug 18 15:03:38 EDT 2008 | awegener

I'd like to get more information about pick and place nozzles. How can I learn more? ... What do the nozzles look like? Are there different shapes? Are custom nozzles sometimes used for custom parts or are the nozzles mostly standardized? What kind

Pick and Place Nozzles

Electronics Forum | Mon Aug 18 22:55:05 EDT 2008 | kpm135

Nozzles are really machine specific. Your best bet, if you're looking for the correct nozzle for a part, would probably be to send a strip of parts and the data sheet to the manufacture of the machine and ask them for their recommendation. Most machi

Pick and place labels

Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank

We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?

  1 2 3 4 5 6 7 8 9 10 Next

sanyo and nozzle searches for Companies, Equipment, Machines, Suppliers & Information

High Precision SMT Fluid Dispensers

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven


World's Best Reflow Oven Customizable for Unique Applications
Assembly Automation Technology

ONLINE IPC Training & Certification