Electronics Forum | Wed Feb 13 07:00:59 EST 2013 | spoiltforchoice
Low-Medium volume and Low Budget are difficult for others to quantify. I'm not familiar with GEM's but if the AX-201 suggested above can use your existing feeders its obviously got a leg up on the competition. Otherwise, to some extent your choice mi
Electronics Forum | Sat Feb 16 16:14:20 EST 2013 | ericrr
Have you done a post-mortem on the blown fuse? Assuming it is a glass fuse, if it is all black around the glass then replacing the fuse will be pointless. (the new fuse will just blow again, making a black mark or BLACKER mark all around the glass)
Electronics Forum | Tue Apr 02 12:53:47 EDT 2013 | microaide
I have entered my machine configuration as much as I can figure it out. I will have two machines. One with tape feeders, and the other with vibratory (tube) feeders and a waffle feeder. I've tried to set this up as best I can. But I get to the screen
Electronics Forum | Fri Apr 12 19:20:25 EDT 2013 | microaide
Some progress, now stuck again. I can now generate a pick and place program for two heads that actually runs the head 1 program when loaded into the central controller of machine #1. But all attempts at getting machine #2 to run the head 2 program ha
Electronics Forum | Mon May 27 11:13:11 EDT 2013 | ericrr
Is there any good articles to read on solder paste? (just to see if I may of missed something) Sometimes I can not believe the people I have to work with. We had a panel with two “Quad Flat Package” (QFP) one in each of the two circuits, almost fr
Electronics Forum | Tue Jun 18 08:47:50 EDT 2013 | wolverine
We recently had one of our older machines ( DEK 265GSX built in 1996 ) begin to have a problem of shutting itself down without warning, after checking out whatever I knew to try and find the cause, I pulled out the Y3 enclosure and removed all the ca
Electronics Forum | Wed Aug 14 17:36:19 EDT 2013 | rgduval
I always prefer to not count parts, period. Generally, I don't have too many problems with customers with this method....I explain to them that the cost of my counting the parts (to them) is much more expensive than the cost of them supplying excess
Electronics Forum | Tue Sep 10 08:42:26 EDT 2013 | rway
Most of our product are mixed technology. I don't consider thru-hole components as "pesky." Perhaps from a manufacturing point of view they are due to the extra handling and machine requirements. But from a reliability stand-point, thru-hole is mu
Electronics Forum | Tue Dec 24 11:01:19 EST 2013 | davef
I wouldn't get too tightly wrapped around the axial of paste suppliers recommendations of thermal recipes. Said another way, "Do not count on the solder paste representatives for good technical advice--they are the ones who came up with these "'TIME
Electronics Forum | Fri Jan 10 11:32:52 EST 2014 | rgduval
Hi, Hans, I would have suggested swapping the MOT card out to see if that fixes the issue (or, changing the MOT card with another one to isolate the card), but, it sounds like you've already done that. I'm surprised that MyData would point you towa
