Electronics Forum | Fri Sep 24 11:08:13 EDT 2004 | davef
We're not sure what you mean by temperature sensitive components. From an assembly process stand-point, every component we use is temperature sensitive to one level or another. More specifically, some of our products use polyphenylene sulfide (PPS)
Electronics Forum | Tue Oct 05 06:50:44 EDT 2004 | cabjerk
Hi All: Thanks for the feedback. I've did a lot of surfing for more info and found there are pro's and con's to each side. One side with the customer P/N your customer service doesn't have to worry if the others bump their builds ahead of your an
Electronics Forum | Sun Oct 10 00:47:01 EDT 2004 | Grant
Hi, I checked one out in Taiwan recently, and they had two NXT systems on the booth. I think they are very exciting, and being able to change the mounter head and camera, and dual lane is good for through put. However each bay is only 20 x 8mm feed
Electronics Forum | Tue Oct 26 13:40:47 EDT 2004 | Paul_pmd
Have the SOIC tested by independant. Clarify as to weather or not you have run this board before. Check to see if the board has been rev'ed. Sometimes IC's are rated at a clock speed or by axcess time. Engneering on this board may be at the tolorance
Electronics Forum | Fri Oct 29 15:24:32 EDT 2004 | glaucon
Do a little bit of digging in the following areas: - Service/Support in China; How good or how bad is it? - Ease of use; can the operators harness all the features? or will you be baby-sitting them? - Access to parts/spares pricing...follows under t
Electronics Forum | Fri Nov 12 03:57:17 EST 2004 | pioneertechnology
Hi All For the past 8 years we have been screen printing paste succesfully using hard rubber blades. Over the past 12 months we have changed paste from lead to lead free, the board size has changed from 300x200mm to 120x90mm and we have also moved
Electronics Forum | Wed Dec 15 07:12:20 EST 2004 | vinitverma
Does Serge need bacons or turkeys?? None of them?? Then let him think about which machine suits his requirements! Throughput, flexibility, large board handling, output derating across board size variation and component size variation! Future proof -
Electronics Forum | Thu Dec 16 03:39:00 EST 2004 | Base
Hi Rob, I can understand why you'r so passionate about your beloved Fuji's and judging by what I'm reading you have every reason to be. But also know this, (Fastek already pointed it out, but I'd like to emphasize it): a company's reputation, be it
Electronics Forum | Tue Dec 14 09:32:59 EST 2004 | patrickbruneel
Hi Paul, One thing I can tell you for sure "lead free" is not going to solve your problem, because spectrum analysis have shown that dendrites at there final stage always consists of pure tin. The higher the tin content the higher the risk for dead
Electronics Forum | Tue Jan 04 12:37:41 EST 2005 | Cmiller
We have been using this finish almost exclusively for fine pitch boards for about 5 years. Make SURE you use a board house that does the gold plating in-house. There are some potential issues as DaveF stated. The only problem we have encountered is w