Electronics Forum | Tue Nov 25 19:38:39 EST 2003 | adlsmt
That gets me into the main operating system but most of the menue's prompt for another one. Also when you exit it asks for one to go to dos. ZCR does not work. Any help would be greatly appreciated.
Electronics Forum | Fri Dec 18 20:27:44 EST 2015 | rowsail
Thanks, I was able to get a PDF of the manual which describes: 1. INSTALL EXTERNAL THERMOCOUPLE PROBE. 2. TURN ON MAIN POWER: a. Press ENTER button b. Press F1 or F2 to scroll to SET UP mode c. Press F3 to select SET UP mode d. Display will read EN
Electronics Forum | Wed Jan 16 18:13:50 EST 2008 | peshlakai74
We have a Seho 1135-F Soldering wave. Everytime we shut the machine off it asks for a password. We call for service and we get a new one. Is there a way i can by pass the password? Thanks.
Electronics Forum | Wed Feb 01 11:37:14 EST 2017 | tlake1974
From the main screen maint(F8)Diagost(F6)Machine Setup(F1). Ther is a password required for the Machine Setup menu. It has been awhile since I have needed to know it and can't remember it.
Electronics Forum | Tue May 29 05:00:41 EDT 2007 | lococost
Grant, apart from troughput another thing to consider is boarddesign, If there is any SMD within a diameter (eg 3mm) of the connector you won't be able to solder them. I think those are the 2 main disadvantages of selective. That being said, for le
Electronics Forum | Fri Jan 13 02:54:25 EST 2017 | roblackey
When the YV100 starts up if you press a key > during its startup you can get it to ascreen > where it asks for passwords.. > > How would you > get the passwords from this Hi, if you haven't changed them then I think it's "specialist" on VIOS.
Electronics Forum | Fri Apr 14 15:12:33 EDT 2017 | mrpackethead
> When the YV100 starts up if you press a key > > during its startup you can get it to ascreen > > where it asks for passwords.. > > > How would you > get the passwords from this > Hi, > > if you haven't changed them then I think > it's "spec
Electronics Forum | Mon May 11 23:16:20 EDT 2020 | richgreen01
Hi I am having issues with fumes coming from my oven,mainly when running lead free paste,it does not have a traditional motor or fan mounted inside but has a modified top extruding motor with a rod leading to the fan inside. So the top is open to a
Electronics Forum | Fri Jan 29 13:31:19 EST 2010 | phase1
We aquired this reflow oven some time ago and finally have the need for it. Anyone who knows how to set up this machine and train an individual would be greatly appreciated. We are located in the Rockville Maryland Area. Power is run to the machine,
Electronics Forum | Mon Apr 19 01:36:55 EDT 2010 | jola
Been a while since I used those machines but I found a list on how it was on ours anyway: MV2-F,C: F8-F1-F7-SHIFT-M-V MPA-V: F8-F1-F7-SHIFT-M-P-SHIFT-A-SHIFT-V MPA-G1: F8-F4-F7-SHIFT-M-F7-P-F7-SHIFT-A-F7 Always start from the main "run" screen. Go
