Electronics Forum | Wed Oct 26 11:18:42 EDT 2022 | proceng1
Are you talking about hhffkdy ? Or the hidden menu password?
Electronics Forum | Wed Oct 26 12:40:20 EDT 2022 | gui
Hi, Yes! Thank you. Is there any hidden menu? What's for?
Electronics Forum | Sat Apr 04 04:53:58 EDT 2020 | tima
Have you try doing initialization from service menu? Exit TPsys, type service -x and try to initialize only Hydra Z. See what error you get. Can be too much friction on the shaft. Run friction test
Electronics Forum | Tue Jan 04 14:06:58 EST 2011 | cyber_wolf
First I would confirm that both of your X-motors and transducers are working through the service menu. After that start looking at the big power booster on the back of the machine.
Electronics Forum | Wed Jul 18 08:07:27 EDT 2007 | allgood
OK thanks - I wasnt aware that I HAD a small x motor! You mentioned being able to check in the service menu - would you care to point me in the right direction. What amazes me - or rather, worries me, is that repeated mentions to the Mydata service
Electronics Forum | Mon Jan 14 12:35:28 EST 2008 | dphilbrick
Jay Go to the Services menu and then station configuration. Choose your F3 machine from the list. This will open the tool that allows you to configure what the machine has on it. Look to see if you have a box with the following: WPC-TR S_WPW_80F
Electronics Forum | Mon Apr 06 14:02:05 EDT 2020 | tomdegas
I have tried that Tim and I get the same error message. Originally it would pass in the service menu but when I switched back to TPsys, it would fail. I tested the friction one time it did pass and it was well withing the range. Thanks for the res
Electronics Forum | Mon Aug 01 12:52:52 EDT 2022 | jojoled
Hi , I am lookingt for somebody who can confirm or definitely reject my expectations...one guy, with some experience with JUKI 740 said, the 740 model it had, and it worked fine....so he is surprised why the newer machine doesnt have it....maybedisab
Electronics Forum | Sat Mar 25 12:51:14 EDT 2023 | rgduval
Swap mot cards and see if the error moves. Of it does, your issue is the mot card, if it doesn't, your issue is one of the above. Try calibrating in the service menu. Check your friction readings. Check the x-encoder (attached to the motor).
Electronics Forum | Sat Apr 09 23:14:36 EDT 2005 | MikeaJ
In response to the post concerning the UP1500, the case is a little different. The Speedline/SMTech passwords are hardcoded into the Sigpro.exe file. Here is what you need to know: Login name: Speedline (or SMTech) Passwords are listed in order of ri
WINTECH provides new/used/pre-owned SMT, AI & PCB Assembly (PCBA) equipment of various brands. Also supply service, modification & original or local-made spare parts. We are also an appointed agent for well-known brands.
Equipment Dealer / Broker / Auctions
NO. 1 LORONG SAGA JAYA 6