Electronics Forum | Tue Feb 01 01:01:19 EST 2011 | jeffr
The YAMAHA manual is not much better. Topaz is slightly harder to calibrate than the later machines due to the machine being fussy about the lighting. Remember that you must setup the QFP68 both in the program for placement and also in the Database f
Electronics Forum | Thu Jul 28 19:08:05 EDT 2011 | garym4569
Right now we are mainly using it in bypass mode until we can program our new inspection recipes. We also tried setting a quick inspection program just to see if bypass mode was not working correctly. Still will not handle pcb transfer correctly. I
Electronics Forum | Wed Oct 01 15:24:55 EDT 2014 | horchak
are you trying to lengthen or shorten the lead length? Lengthening the amount of lead being cut off and going into the scrap tube will shorten the lead length. Lead length is pretty much determined by the down stop setting on the insertion head, the
Electronics Forum | Fri Dec 18 20:27:44 EST 2015 | rowsail
Thanks, I was able to get a PDF of the manual which describes: 1. INSTALL EXTERNAL THERMOCOUPLE PROBE. 2. TURN ON MAIN POWER: a. Press ENTER button b. Press F1 or F2 to scroll to SET UP mode c. Press F3 to select SET UP mode d. Display will read EN
Electronics Forum | Wed May 13 12:39:25 EDT 2015 | arbpkevin
Ahh, yes. Just about the same time you replied someone else I asked said the same thing! I didn't realize that you had to put the part on by hand for the vision test. In the book it says to leave the feeder position set to the default setting. Fu
Electronics Forum | Tue Dec 01 15:32:27 EST 2020 | spoiltforchoice
Could be your graphics card driver is set to output a resolution/refresh rate not supported by either monitor you tried. In that case XPs "Safe Mode" should use safe defaults just like it is doing when you see the loading bar. Another option is someh
Electronics Forum | Sat May 14 00:10:30 EDT 2022 | cbeneat
Alex, I can tell you from experience it took a great deal of experimenting with settings when we first started running these. Our best course of action if the settings aren't making a difference, is the blow off. I've had it, let's say pretty high as
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
Electronics Forum | Fri Mar 10 13:56:55 EST 2000 | Stuart Scholz
Anyone using or know of a company with a program to verify SMT feeder set-up?
Electronics Forum | Thu Oct 18 20:49:11 EDT 2001 | ianchan
whats ur email address?