Electronics Forum: shadow (Page 1 of 16)

Reflow solder issues with 6pin SOT's

Electronics Forum | Tue Aug 09 12:31:11 EDT 2005 | Rob

Are they being shadowed by larger components?

Curing Conformal Coating

Electronics Forum | Fri Jun 06 03:30:11 EDT 2008 | lococost

What about shadow effects? How do you cure UV coat under components?

Black Pad?? (PICTURES)

Electronics Forum | Mon Oct 20 14:17:35 EDT 2008 | robinj

The discoloration/shadow appearance is a clear sign of black pad which is from nickel corrosion in the gold bath.

Bottom side adheasive

Electronics Forum | Tue Dec 09 14:17:13 EST 2008 | dphilbrick

We exclusively use a printer to do glue these days but keep in mind there are times when glue and paste work best. Things like poor layout (ie shadowing) or tall parts that may shadow themselves or a wave solder machine that is not particularly good

What's The Resolution?

Electronics Forum | Mon Jun 18 19:49:45 EDT 2001 | Gil Zweig

To best visualize the factors effecting resolution, carry in your minds eye an image of a light shadow being cast on the wall using a flashlight. The size of the flashlight filament would be the analagous x-ray "focal spot" The smoothness and/or roug

Re: conformal coating selection

Electronics Forum | Mon Nov 27 13:36:41 EST 2000 | C.K.

You'd more than likely have repairability issues with the Acrylic based one. The acrylic-based finish is alot harder and more brittle versus the silicone. Some of the new silicones, you can just "peel" with your fingernail, while still getting reli

Another Wave Solder Question....

Electronics Forum | Thu Jan 24 20:00:24 EST 2002 | davef

If solder touches gold, you should see solder, rather than gold. Since you see gold, something is wrong. * Is the solder touching the gold? If not, why not? * If the solder is touching the gold, but the gold is not soldering, there is a problem w

Bottom side process question

Electronics Forum | Fri Mar 16 13:50:16 EST 2001 | mparker

Shadowing sounds about right to me also. Really dicey experiment to run if you are dropping expensive tantalums just to save a little coin in epoxy and processing time.

Fine Pitch Rework

Electronics Forum | Tue Jan 08 17:47:15 EST 2002 | mantis

Well assuming that the parts are genuinely damaged when rejected and you want to rework them to reduce scrap,you could use a shadow graph and get the mechanical spec on clear film.Then rework accordingly you should be able to rework most leads.

Another Wave Solder Question....

Electronics Forum | Fri Jan 25 11:50:41 EST 2002 | retronix

First thing to try is to rotate the board 90 deg if possible, this will let you know if shadowing is the cause. Regards Matt

  1 2 3 4 5 6 7 8 9 10 Next

shadow searches for Companies, Equipment, Machines, Suppliers & Information