Electronics Forum: shielding (Page 1 of 29)

Problem with shielding component

Electronics Forum | Wed Jan 10 13:02:50 EST 2007 | aj

We ran 4 boards without shields and they work fine.

Problem with shielding component

Electronics Forum | Wed Jan 10 13:03:50 EST 2007 | aj

We also took the shields off one of the boards and retested and it still fails...

Problem with shielding component

Electronics Forum | Thu Jan 18 10:59:26 EST 2007 | aj

All, apologies for dragging this thread up again but after some xray analysis it looks like there is no issue with the soldering of any components namely 2 x bga and 1 qfn device which are placed within the shielding area..but yet they fail to perfo

Problem with shielding component

Electronics Forum | Tue Jan 09 22:33:45 EST 2007 | Guest

Dear AJ, Try removing shield ,test it, verify if it would perform as the previous runs . If not, there maybe something wrong with device or as one of our collegue mentioned that there is possibilty the your customer change some components.If the

Problem with shielding component

Electronics Forum | Wed Jan 10 09:57:08 EST 2007 | realchunks

Shields can carry a large thermal mass. If you ever tried removing one in repair, you'd find out how hard they can be. Also, they do deflect air flow. So in a convection oven, your air flow will be turbulent, which also will affect your reflow.

Problem with shielding component

Electronics Forum | Fri Jan 12 00:59:04 EST 2007 | Guest

Your evaluation results confirms that Real Chunks is right on thermal mass absorption of the shield, that probably brought cold spots during reflow . I agree with his suggesttions as well.

Problem with shielding component

Electronics Forum | Fri Jan 12 02:11:32 EST 2007 | aj

All, I ran a failed board back thru reflow with shields removed and it works fine. I think that tells me something ? Thanks all who contributed to the thread. aj...

Problem with shielding component

Electronics Forum | Tue Jan 09 13:01:17 EST 2007 | stepheniii

Not unless it's a case of "the only difference is..." What I mean by that is more than once I've been told the only difference in a new rev is one component or one change. But the truth was that was the only reason for the change, and in fact there

Problem with shielding component

Electronics Forum | Sat Jan 13 17:19:15 EST 2007 | aj

Hi all, What length of time is recommended for the "soak stage"? aj...

Problem with shielding component

Electronics Forum | Tue Jan 16 16:21:08 EST 2007 | slthomas

How close is the "fence" to the part in question?

  1 2 3 4 5 6 7 8 9 10 Next

shielding searches for Companies, Equipment, Machines, Suppliers & Information

ORION Industries
ORION Industries

ORION provides innovative solutions to our customers' EMI/RFI Shielding, Insulating, Screening and Sealing needs in a broad spectrum of manufacturing environments.

Manufacturer / Distributor / Consultant / Service Provider

1 Orion Park Drive
Ayer, MA USA

Phone: 978-772-6000

Sell Used SMT & Test Equipment

Wave Soldering 101 Training Course
Selective soldering solutions with Jade soldering machine

High Precision Fluid Dispensers
SMT feeders

World's Best Reflow Oven Customizable for Unique Applications
Software for SMT

High Resolution Fast Speed Industrial Cameras.