Electronics Forum: silicon-based coating (Page 1 of 3)

Conformal coating mask dots and halos

Electronics Forum | Fri Feb 26 10:34:03 EST 2010 | kpm135

If I had to guess I'd say they're using a silicone based adhesive.

DIP Conformal Coating

Electronics Forum | Fri Feb 11 16:34:01 EST 2000 | Chris McDonald

Does anybody have a source for jigs/tanks for a manual dip operation? We are stuck conformally coating PCBs manualy and the volumes do not justify us buying a 100k automated machine. there for we have to manually dip the pcb in a silicon based coatin

Conformal coat material dispensed through epoxy needle?

Electronics Forum | Tue Jan 31 13:41:41 EST 2017 | tombstonesmt

Dow Corning 3-1953 is widely used when it comes to silicone based conformal coatings. Low odor, medium viscosity, can be atomized or needle dispensed. We have our operators fill syringe cartridges for any minor touch up.

Masking of PWBs prior to conformal coat

Electronics Forum | Thu Apr 20 09:26:10 EDT 2006 | amol_kane

I am using Silicone based boots with SR coating with good results. I Use Vinyl and Rubber boots with AR and UR coatings.

Conformal Coating Masking

Electronics Forum | Thu Jun 07 16:12:36 EDT 2001 | csullivan

Does anyone know of a good masking material for conformal coating? The coating is silicon based. Any help would be greatly appreciated. Thanks

Urethane Coating (1A33)

Electronics Forum | Mon Aug 25 14:55:51 EDT 2008 | grics

I have a question for the manufacturing masters... We are going to start running test trials/DOE of a Urethane Coating (Humiseal 1A33) and I am not sure what to expect. From what I understand, urethane coating is pretty difficult to work. It is supp

silicone conformal coat and electrical contacts

Electronics Forum | Fri Jan 26 13:26:30 EST 2007 | rw

We are developing a new product that requires conformal coating on the motor controller. We selected a silicone based conformal coat due to its ease of use. There has been disagreement among engineers as to its impact on the motor. We have contact

Conformal Coating Masking

Electronics Forum | Mon Jun 18 11:17:40 EDT 2001 | Howie

The adhesive type is the problem generally - latex adhesives used are not compatible with the silicone. Humiseal offer silicone compatible tapes & dots although they are quite expensive. I found a 3M product which is compatible with silicone based co

Masking of PWBs prior to conformal coat

Electronics Forum | Wed Apr 19 16:43:05 EDT 2006 | samir

Silicone-based coatings "repel" most foreign,non-compatible materials like peelable solder mask, and rubber or vinyl boots. The result is, uncured material around the vicinity of where the boot was. Trust me. Been there and done that. As a rookie

Conformal Coating removal from packaging?

Electronics Forum | Mon Dec 08 16:47:50 EST 2008 | pwilson1

Hi All, Does anyone know of a method (automated if possible) for removing cured Conformal Coating, silicone based, from plastic?? I m looking into a method of cleaning our internal packaging (mainly plastic boxes etc), which have cured sil

  1 2 3 Next

silicon-based coating searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Reflow Soldering 101 Training Course
One stop service for all SMT and PCB needs

High Precision Fluid Dispensers
PCB Handling Machine with CE

World's Best Reflow Oven Customizable for Unique Applications
design with ease with Win Source obselete parts and supplies

Low-cost, self-paced, online training on electronics manufacturing fundamentals