Electronics Forum | Fri Aug 28 11:59:05 EDT 2015 | gascon5383
Actually I should have noted we resolved this issue. After chasing our tails for a while, we found that somehow there was a static charge on the boards going into the machine. This static was discharging to the camera through the board stop, causing
Electronics Forum | Thu Nov 13 12:49:45 EST 2014 | dyoungquist
I have no experience running a "move the board" selective solder so can not compare the 2 methods..... We have been using an RPS Rhythm "move the pot/nozzle" system since 2008. We are using it solder thru hole components onto boards that often have
Electronics Forum | Tue Jan 06 13:26:47 EST 2015 | rgduval
I can't say I've ever heard that you shouldn't rework class 3 products. Since class 3 and class 2 are inherently inspection standards, rework might be required to meet class 3 specs. In the past, that has been an issue, as everyone wants to produce
Electronics Forum | Sat Jan 24 02:10:42 EST 2015 | comatose
Liquid is significantly cheaper than compressed gas tanks if you are in continuous production. Of course, it will eat your lunch if you're running things for a few days, then the machine sits idle for two weeks. It boils off whether you use it or n
Electronics Forum | Tue Feb 17 09:37:16 EST 2015 | charliedci
We made the same change a year ago, from foam to spray fluxer. One of the reasons we changed, to keep the acid number within specs (foam fluxing) we had to measure once or twice a day and add DI water to make up for evaporation, all along not able to
Electronics Forum | Tue Feb 24 15:52:58 EST 2015 | swiese242
We currently have around 20k+ components in stock. I would like to have some opinions on creating a more lean manufacturing system. We check stock in our system and then order parts. Most of time leading to employees looking for parts, or shorts. We
Electronics Forum | Wed Apr 08 15:40:20 EDT 2015 | kevinb
I would like to find somebody that uses Hysol, (Loctite) material GR 9810-1P. I would like to see how it molds and see if they could part with some of this material for us to try. We are willing to pay for a trial sample. I can go to Hysol but the
Electronics Forum | Tue Jul 28 17:27:21 EDT 2015 | anvil1021
Bottom Line no matter which machine you pick make sure you have a dedicated programmer that is completely trained on the machine you choose. Every machine has its strong and weak points it is the understanding of how the machine functions and how to
Electronics Forum | Wed Aug 19 09:14:26 EDT 2015 | sarason
Try a more intelligent telnet program that has a few diagnostics. I dont know the Mirae machine myself but the ext thing would be to do a trace on machine operation. maybe the booting sequence has the Telnet Host( Or is it Client?) boot after the mac
Electronics Forum | Fri Oct 02 09:22:24 EDT 2015 | derrikf
The following is representative of on-board temps of a FR4 at .069" thickness. The thermal couples were soldered directly to the board using high-temp solder. Again, the halogen-free solder requires an identical profile to our old solder. We had grea